Linux documentation

17 posts / 0 new
Last post
wspies721
Linux documentation

Can you please send me documentation for getting this to work on Linux? I want to use the CLI only and I have (unfortunately) purchased this now.

Michael
.
wspies721
Where would the content of my

Where would the content of my drive be after all of this? It all ran fine -- I see the drive using the -t I just don't know where the content of the drive are. Not under /cdrom not under /mnt .....

Michael
try vhclientx86_64 -t LIST

try vhclientx86_64 -t LIST

it should show the device as being used with a

*

try typing

mount

and it should show where it is mounted

wspies721
Still not seeing it

So I still do not see any Mount. Here is a shot of my commands and their responses.

Synology Hub (Spies-Cloud:37575)
--> Pioneer Blu-ray Drive (Spies-Cloud.41) (In-use by you)

Auto-Find currently on
Auto-Use All currently off
Reverse Lookup currently off
VirtualHere Client is running as a service
root@will-linux:/home/will# ./vhclientx86_64 -t list
VirtualHere Client IPC, below are the available devices:
(Value in brackets = address, * = Auto-Use)

Synology Hub (Spies-Cloud:37575)
--> Pioneer Blu-ray Drive (Spies-Cloud.41) (In-use by you)

Auto-Find currently on
Auto-Use All currently off
Reverse Lookup currently off
VirtualHere Client is running as a service
root@will-linux:/home/will# mount > tt.t
root@will-linux:/home/will# vi tt.t
root@will-linux:/home/will# ./vhclientx86_64 -t list
VirtualHere Client IPC, below are the available devices:
(Value in brackets = address, * = Auto-Use)

Synology Hub (Spies-Cloud:37575)
--> Pioneer Blu-ray Drive (Spies-Cloud.41) (In-use by you)

Auto-Find currently on
Auto-Use All currently off
Reverse Lookup currently off
VirtualHere Client is running as a service
root@will-linux:/home/will# vi tt.t
root@will-linux:/home/will# ./vhclientx86_64 -t list
VirtualHere Client IPC, below are the available devices:
(Value in brackets = address, * = Auto-Use)

Synology Hub (Spies-Cloud:37575)
--> Pioneer Blu-ray Drive (Spies-Cloud.41) (In-use by you)

Auto-Find currently on
Auto-Use All currently off
Reverse Lookup currently off
VirtualHere Client is running as a service
root@will-linux:/home/will# mount
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=990108k,nr_inodes=247527,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=204072k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=24,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=321)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
/var/lib/snapd/snaps/gnome-system-monitor_51.snap on /snap/gnome-system-monitor/51 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_64.snap on /snap/gnome-3-26-1604/64 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_180.snap on /snap/gnome-calculator/180 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_25.snap on /snap/gnome-logs/25 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_178.snap on /snap/gnome-calculator/178 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_45.snap on /snap/gnome-system-monitor/45 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_70.snap on /snap/gnome-3-26-1604/70 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_4830.snap on /snap/core/4830 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_54.snap on /snap/gnome-system-monitor/54 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_5145.snap on /snap/core/5145 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_117.snap on /snap/gnome-characters/117 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_59.snap on /snap/gnome-3-26-1604/59 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_40.snap on /snap/gnome-logs/40 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_4917.snap on /snap/core/4917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_199.snap on /snap/gnome-calculator/199 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_103.snap on /snap/gnome-characters/103 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_101.snap on /snap/gnome-characters/101 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_37.snap on /snap/gnome-logs/37 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_319.snap on /snap/gtk-common-themes/319 type squashfs (ro,nodev,relatime,x-gdu.hide)
tmpfs on /run/user/120 type tmpfs (rw,nosuid,nodev,relatime,size=204068k,mode=700,uid=120,gid=125)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=204068k,mode=700,uid=1000,gid=1000)
root@will-linux:/home/will#

wspies721
I am running this as root

I am running this as root

Michael
.

Can you send me the output of

uname -a
Michael
.

Can you make sure you are using the latest linux kernel e.g ubuntu 18.04.1 (4.15 kernel)

wspies721
will@will-linux:~$ uname -a

will@will-linux:~$ uname -a
Linux will-linux 4.15.0-33-generic #36-Ubuntu SMP Wed Aug 15 16:00:05 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
will@will-linux:~$

Michael
.

What about if you look in dmesg or /var/log/syslog If will say where it is mounted or at least what is going on.

wspies721
Now your on to something....

Now your on to something.....here is an excerpt from syslog (just what appears to be usb related):

Aug 29 09:47:46 will-linux mtp-probe: checking bus 2, device 3: "/sys/devices/platform/vhci_hcd.0/usb2/2-1"
Aug 29 09:47:46 will-linux mtp-probe: bus: 2, device: 3 was not an MTP device
Aug 29 09:47:46 will-linux upowerd[875]: unhandled action 'bind' on /sys/devices/platform/vhci_hcd.0/usb2/2-1/2-1:1.0
Aug 29 09:47:46 will-linux upowerd[875]: unhandled action 'bind' on /sys/devices/platform/vhci_hcd.0/usb2/2-1
Aug 29 09:47:47 will-linux kernel: [14642.010953] scsi 3:0:0:0: CD-ROM PIONEER BD-RW BDR-XS06 1.10 PQ: 0 ANSI: 0
Aug 29 09:47:47 will-linux kernel: [14642.020802] sr 3:0:0:0: Power-on or device reset occurred
Aug 29 09:47:47 will-linux kernel: [14642.042787] sr 3:0:0:0: [sr2] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Aug 29 09:47:47 will-linux kernel: [14642.044450] sr 3:0:0:0: Attached scsi CD-ROM sr2
Aug 29 09:47:47 will-linux kernel: [14642.045480] sr 3:0:0:0: Attached scsi generic sg3 type 5
Aug 29 09:47:55 will-linux kernel: [14650.036139] vhci_hcd: unlink->seqnum 104
Aug 29 09:47:55 will-linux kernel: [14650.036144] vhci_hcd: urb->status -104
Aug 29 09:47:56 will-linux kernel: [14650.935941] usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
Aug 29 09:47:57 will-linux kernel: [14651.843975] usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
Aug 29 09:47:58 will-linux kernel: [14652.743924] usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
Aug 29 09:47:59 will-linux kernel: [14653.643961] usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
Aug 29 09:47:59 will-linux kernel: [14653.644153] usb 2-1: USB disconnect, device number 3
Aug 29 09:48:00 will-linux kernel: [14654.599888] usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
Aug 29 09:48:01 will-linux kernel: [14655.499950] usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
Aug 29 09:48:01 will-linux kernel: [14655.499982] usb usb2-port1: attempt power cycle
Aug 29 09:48:02 will-linux kernel: [14656.716048] usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
Aug 29 09:48:03 will-linux kernel: [14657.616013] usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
Aug 29 09:48:03 will-linux kernel: [14657.616043] usb usb2-port1: unable to enumerate USB device

wspies721
Aug 29 14:18:21 will-linux

Aug 29 14:18:21 will-linux kernel: [15593.653604] vhci_hcd vhci_hcd.0: pdev(0) rhport(0) sockfd(5)
Aug 29 14:18:21 will-linux kernel: [15593.653609] vhci_hcd vhci_hcd.0: devid(4) speed(3) speed_str(high-speed)
Aug 29 14:18:21 will-linux kernel: [15593.888326] usb 4-1: new high-speed USB device number 3 using vhci_hcd
Aug 29 14:18:21 will-linux kernel: [15594.020377] usb 4-1: SetAddress Request (3) to port 0
Aug 29 14:18:21 will-linux kernel: [15594.052105] usb 4-1: New USB device found, idVendor=08e4, idProduct=017a
Aug 29 14:18:21 will-linux kernel: [15594.052109] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 29 14:18:21 will-linux kernel: [15594.052112] usb 4-1: Product: Pioneer Blu-ray Drive
Aug 29 14:18:21 will-linux kernel: [15594.052114] usb 4-1: Manufacturer: Pioneer Corporation
Aug 29 14:18:21 will-linux kernel: [15594.052116] usb 4-1: SerialNumber: 1247122620900736
Aug 29 14:18:21 will-linux kernel: [15594.060793] usb-storage 4-1:1.0: USB Mass Storage device detected
Aug 29 14:18:21 will-linux kernel: [15594.067193] scsi host3: usb-storage 4-1:1.0
Aug 29 14:17:55 will-linux : mDNS_AddDNSServer: DNS server limit of 64 reached, not adding this server
Aug 29 14:18:21 will-linux mtp-probe: checking bus 4, device 3: "/sys/devices/platform/vhci_hcd.0/usb4/4-1"
Aug 29 14:18:21 will-linux mtp-probe: bus: 4, device: 3 was not an MTP device
Aug 29 14:18:21 will-linux upowerd[871]: unhandled action 'bind' on /sys/devices/platform/vhci_hcd.0/usb4/4-1/4-1:1.0
Aug 29 14:18:21 will-linux upowerd[871]: unhandled action 'bind' on /sys/devices/platform/vhci_hcd.0/usb4/4-1
Aug 29 14:18:22 will-linux kernel: [15595.145557] scsi 3:0:0:0: CD-ROM PIONEER BD-RW BDR-XS06 1.10 PQ: 0 ANSI: 0
Aug 29 14:18:22 will-linux kernel: [15595.171131] sr 3:0:0:0: Power-on or device reset occurred
Aug 29 14:18:22 will-linux kernel: [15595.237063] sr 3:0:0:0: [sr2] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Aug 29 14:18:22 will-linux kernel: [15595.237512] sr 3:0:0:0: Attached scsi CD-ROM sr2
Aug 29 14:18:22 will-linux kernel: [15595.237837] sr 3:0:0:0: Attached scsi generic sg3 type 5
Aug 29 14:18:25 will-linux : mDNS_AddDNSServer: DNS server limit of 64 reached, not adding this server
Aug 29 14:18:26 will-linux kernel: [15599.009377] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
Aug 29 14:18:26 will-linux kernel: [15599.122885] vhci_hcd: connection closed
Aug 29 14:18:26 will-linux kernel: [15599.123127] vhci_hcd: stop threads
Aug 29 14:18:26 will-linux kernel: [15599.123133] vhci_hcd: release socket
Aug 29 14:18:26 will-linux kernel: [15599.123143] vhci_hcd: disconnect device
Aug 29 14:18:26 will-linux kernel: [15599.304399] vhci_hcd: vhci_device speed not set
Aug 29 14:18:27 will-linux kernel: [15599.928491] usb 4-1: USB disconnect, device number 3
Aug 29 14:18:27 will-linux kernel: [15599.940155] scsi 3:0:0:0: rejecting I/O to offline device
Aug 29 14:18:27 will-linux kernel: [15599.940166] scsi 3:0:0:0: killing request
Aug 29 14:18:25 will-linux : mDNS_AddDNSServer: DNS server limit of 64 reached, not adding this server
Aug 29 14:18:28 will-linux upowerd[871]: unhandled action 'unbind' on /sys/devices/platform/vhci_hcd.0/usb4/4-1/4-1:1.0
Aug 29 14:18:28 will-linux upowerd[871]: unhandled action 'unbind' on /sys/devices/platform/vhci_hcd.0/usb4/4-1
Aug 29 14:18:48 will-linux qemu-ga: info: guest-ping called
Aug 29 14:18:55 will-linux : mDNS_AddDNSServer: DNS server limit of 64 reached, not adding this server
Aug 29 14:19:25 will-linux : message repeated 3 times: [ mDNS_AddDNSServer: DNS server limit of 64 reached, not adding this server]
Aug 29 14:19:49 will-linux qemu-ga: info: guest-ping called
Aug 29 14:19:55 will-linux : mDNS_AddDNSServer: DNS server limit of 64 reached, not adding this server
Aug 29 14:20:25 will-linux : message repeated 3 times: [ mDNS_AddDNSServer: DNS server limit of 64 reached, not adding this server]
Aug 29 14:20:49 will-linux qemu-ga: info: guest-ping called
Aug 29 14:20:55 will-linux : mDNS_AddDNSServer: DNS server limit of 64 reached, not adding this server
root@will-linux:/var/log#

Michael
.

Doesnt seem that pioneer drive is compatible. Im happy to give you a refund if you want. let me know

wspies721
Sure. I will take a refund.

Sure. I will take a refund.

wspies721
Actually, wait. I'm not

Actually, wait. I'm not giving up yet. I get a Win10 laptop in a month and I want to try that out. Also, if I were to somehow get this over USB 2.0 as opposed to USB 3.0 do you think that would make a difference?

Michael
.

Yes USB2.0 might work. If you plug a usb 2.0 hub into your server then plug the writer into that. Then give it a try via virtualhere.

wspies721
I'll give USB 2.0 and also

I'll give USB 2.0 and also when I get Win10 give that a try -- and keep my license for now. Thanks. I'll let you know.

Log in or register to post comments