Page not found

About searching
  1. Communication issue from Server to Client

    Communication issue from Server to Client I’m using the Trial Version with … When I connect to the laser engraver directly through a usb cable the proper parameters are received in Lightburn.  … is the dat when I select Properties: Name: Espressif Device Vendor: Espressif Systems Product: Espressif …

    CHP - 2024/03/11 - 06:44 - 9 comments

  2. Lost data during serial communication with Arduino Uno

    … have to reproduce the error). This happens on Windows client, Linux sever. We haven't seen this on the Linux … ; // wait for serial port to connect. Needed for native USB port only } } void serialEvent() { if (!writing && … . In windows device properties, can you find the com port and select …

    caseyboardman - 2018/08/07 - 17:55 - 13 comments

  3. Two-way communication

    … Hi, I am trying to use VirtualHere to connect a ANT+ USB sensor to a server. The VirtualHere server runs on a laptop with the USB device connected, and the client runs on the server. The connection between the two …

    Soepkip - 2017/11/12 - 05:17 - 4 comments

  4. USB device to client communication

    USB device to client communication Hello, I´ve got one …

    OndrejDvorak - 2020/02/16 - 15:58 - 4 comments

  5. Kodak Alaris Scanmate i1150 not recognized

    … PC - Kodak Alaris Scanmate i1150 connected to QNAP USB port The setup for the scanner installs: - scanner device drivers for windows - TWAIN/ISIS drivers for … I've also tried on a standalone PC. The virtualhere client is installed on the PC/vm and recognizes the QNAP USB

    razulli - 2017/03/15 - 02:24 - 3 comments

  6. Canon PIXMA iP4300 printer not working

    … I try to autoenable (or manual enable) it in your Windows client I keep hearing the system connect / disconnect sound … it. I tried to connect the printer to all the other USB 2.0 / USB 3.0 connectors without any succefull result. … the server so it automatically skips a reset for this device in the future.. …

    Cr4z33 - 2021/04/20 - 17:34 - 13 comments

  7. Using VirtualHere through loopback interface is 4 times slower

    … <p>Ultimately, the usecase here is to flash an embedded device with USB-connected JTAG adapter using OpenOCD. The setup we are … <p>I am not sure how can I run both the server and the client in Pi (guess the kernel would go crazy), but please …

    roman.saveljev - 2015/07/03 - 06:18 - 6 comments

  8. How to Test Connection?

    … problems connecting. My Setup Server: COM->USB->Raspberry Pi 4 [ VHServer WORKS ] Client: Win 10 64bit ->Virtual USB (COM1) [ VHClient WORKS ] Server RPi4 # lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus …

    Doogi - 2020/08/12 - 00:10 - 7 comments

  9. VirtualHere Server 2.5.0 on RaspberryPI caught signal 11 while shut down

    … The process history was that I plugged and unplugged some USB devices and while shut dow nthe server application with … shutdown) Oct 14 12:30:52 RPI-eid vhusbd[2547]: Device 112 UNBOUND from connection 5 Oct 14 12:30:52 … the same Card Reader on Windows with virtuaHere GUI Windows Client I do not get such error in syslog, but the …

    psy - 2015/10/12 - 22:05 - 21 comments

  10. Auto-Disconnect feature / QNAP qpkg not up-to-date

    … a constant amount of time for the script to disconnect the USB printer via API. So here's my feature request: Would it … feature? If no communication to that device happens for n-seconds then the client (or server?) could automatically detach the device. …

    lchiocca - 2015/05/06 - 19:54 - 10 comments