usb devices went away, virtualhere server still seen by client.

17 posts / 0 new
Last post
Konstruukt
usb devices went away, virtualhere server still seen by client.

Devices were connected properly and working then all of a sudden went away, any ideas?

root@CloudHub_1e093d:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180 (michael@ubuntu) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11063-85e04e9f46)) #0 Sat May 16 18:32:20 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x1ac00000
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c0826eec, node_mem_map dbc6a100
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 114688 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:4B:5C:68 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 430496K/458752K available (4436K kernel code, 157K rwdata, 1028K rodata, 1024K init, 327K bss, 11872K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xdc800000 - 0xff800000 ( 560 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0555268 (5429 kB)
[ 0.000000] .init : 0xc0700000 - 0xc0800000 (1024 kB)
[ 0.000000] .data : 0xc0800000 - 0xc08276c0 ( 158 kB)
[ 0.000000] .bss : 0xc082bdd0 - 0xc087db24 ( 328 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000028] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000066] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000146] bcm2835: system timer (irq = 27)
[ 0.000640] Console: colour dummy device 80x30
[ 0.001144] console [tty1] enabled
[ 0.001204] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060287] pid_max: default: 32768 minimum: 301
[ 0.060482] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060527] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.061239] CPU: Testing write buffer coherency: ok
[ 0.062021] Setting up static identity map for 0x100000 - 0x10005c
[ 0.069082] random: get_random_u32 called from bucket_table_alloc+0x160/0x1a8 with crng_init=0
[ 0.069474] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.069856] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.069918] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.071947] pinctrl core: initialized pinctrl subsystem
[ 0.073137] NET: Registered protocol family 16
[ 0.075732] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.081100] cpuidle: using governor ladder
[ 0.081159] cpuidle: using governor menu
[ 0.081673] Serial: AMBA PL011 UART driver
[ 0.084045] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[ 0.084716] uart-pl011 20201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.116982] bcm2835-dma 20007000.dma: DMA legacy API manager at dc80f000, dmachans=0x1
[ 0.119893] SCSI subsystem initialized
[ 0.120127] usbcore: registered new interface driver usbfs
[ 0.120241] usbcore: registered new interface driver hub
[ 0.120372] usbcore: registered new device driver usb
[ 0.130623] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-23 19:36
[ 0.132120] clocksource: Switched to clocksource timer
[ 0.140709] NET: Registered protocol family 2
[ 0.141626] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141740] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141830] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.141983] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142035] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142338] NET: Registered protocol family 1
[ 0.143754] Crashlog allocated RAM at address 0x3f00000
[ 0.144180] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.150372] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.152959] io scheduler noop registered
[ 0.153012] io scheduler deadline registered
[ 0.153395] io scheduler cfq registered (default)
[ 0.155608] BCM2708FB: allocated DMA memory 5ad00000
[ 0.155685] BCM2708FB: allocated DMA channel 0 @ dc80f000
[ 0.163668] Console: switching to colour frame buffer device 82x26
[ 0.172535] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.176996] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.183547] vc-sm: Videocore shared memory driver
[ 0.198657] brd: module loaded
[ 0.207247] loop: module loaded
[ 0.210320] usbcore: registered new interface driver smsc95xx
[ 0.213201] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.243993] dwc_otg 20980000.usb: base=0xf0980000
[ 0.446822] Core Release: 2.80a
[ 0.449496] Setting default values for core params
[ 0.452202] Finished setting default values for core params
[ 0.654925] Using Buffer DMA mode
[ 0.657502] Periodic Transfer Interrupt Enhancement - disabled
[ 0.660116] Multiprocessor Interrupt Enhancement - disabled
[ 0.662778] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.665438] Dedicated Tx FIFOs mode
[ 0.668917] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xdad14000 dma = 0x5ad14000 len=9024
[ 0.674564] FIQ FSM acceleration enabled for :
[ 0.674564] Non-periodic Split Transactions
[ 0.674564] Periodic Split Transactions
[ 0.674564] High-Speed Isochronous Endpoints
[ 0.674564] Interrupt/Control Split Transaction hack enabled
[ 0.687820] dwc_otg: Microframe scheduler enabled
[ 0.688014] WARN::hcd_init_fiq:459: FIQ on core 0 at 0xc03e48e4
[ 0.690653] WARN::hcd_init_fiq:460: FIQ ASM at 0xc03e4b6c length 36
[ 0.693326] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[ 0.696095] dwc_otg 20980000.usb: DWC OTG Controller
[ 0.698799] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[ 0.701534] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[ 0.704267] Init: Port Power? op_state=1
[ 0.706851] Init: Power Port (0)
[ 0.709717] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.712481] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.715169] usb usb1: Product: DWC OTG Controller
[ 0.717773] usb usb1: Manufacturer: Linux 4.14.180 dwc_otg_hcd
[ 0.720382] usb usb1: SerialNumber: 20980000.usb
[ 0.723716] hub 1-0:1.0: USB hub found
[ 0.726366] hub 1-0:1.0: 1 port detected
[ 0.729647] dwc_otg: FIQ enabled
[ 0.729657] dwc_otg: NAK holdoff enabled
[ 0.729662] dwc_otg: FIQ split-transaction FSM enabled
[ 0.729678] Module dwc_common_port init
[ 0.730151] usbcore: registered new interface driver uas
[ 0.732928] usbcore: registered new interface driver usb-storage
[ 0.735520] mousedev: PS/2 mouse device common for all mice
[ 0.737960] i2c /dev entries driver
[ 0.741228] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.744437] bcm2835-cpufreq: min=700000 max=1000000
[ 0.747735] sdhci: Secure Digital Host Controller Interface driver
[ 0.750389] sdhci: Copyright(c) Pierre Ossman
[ 0.753611] mmc-bcm2835 20300000.mmc: could not get clk, deferring probe
[ 0.756852] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
[ 0.759798] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.764263] vchiq: vchiq_init_state: slot_zero = dad80000, is_master = 0
[ 0.768130] [vc_sm_connected_init]: start
[ 0.777816] [vc_sm_connected_init]: end - returning 0
[ 0.781075] NET: Registered protocol family 10
[ 0.784642] Segment Routing with IPv6
[ 0.786694] NET: Registered protocol family 17
[ 0.788617] 8021q: 802.1Q VLAN Support v1.8
[ 0.796887] uart-pl011 20201000.serial: cts_event_workaround enabled
[ 0.799033] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.804807] console [ttyS0] disabled
[ 0.806942] 20215040.serial: ttyS0 at MMIO 0x0 (irq = 160, base_baud = 31250000) is a 16550
[ 1.590435] console [ttyS0] enabled
[ 1.597323] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.605508] mmc-bcm2835 20300000.mmc: DMA channel allocated
[ 1.613538] Indeed it is in host mode hprt0 = 00021501
[ 1.689008] random: fast init done
[ 1.733750] sdhost: log_buf @ dad13000 (5ad13000)
[ 1.778438] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.788567] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.798444] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.809590] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.822193] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.830683] of_cfs_init
[ 1.835188] of_cfs_init: OK
[ 1.840602] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.869924] Waiting for root device /dev/mmcblk0p2...
[ 1.877179] Indeed it is in host mode hprt0 = 00001101
[ 2.036355] mmc1: new high speed SDIO card at address 0001
[ 2.057040] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.075546] mmc0: new high speed SDHC card at address aaaa
[ 2.083661] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 2.096283] mmcblk0: p1 p2
[ 2.124313] usb 1-1: New USB device found, idVendor=05e3, idProduct=0605
[ 2.133162] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.142303] usb 1-1: Product: USB2.0 Hub
[ 2.149795] hub 1-1:1.0: USB hub found
[ 2.156416] hub 1-1:1.0: 4 ports detected
[ 2.164136] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 2.176259] Freeing unused kernel memory: 1024K
[ 2.468954] init: Console is alive
[ 2.474873] init: - watchdog -
[ 2.541520] usb 1-1.2: new full-speed USB device number 3 using dwc_otg
[ 2.784507] usb 1-1.2: New USB device found, idVendor=0738, idProduct=a221
[ 2.793749] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 2.803276] usb 1-1.2: Product: Saitek Pro Flight X-56 Rhino Throttle
[ 2.811857] usb 1-1.2: Manufacturer: Mad Catz
[ 2.818312] usb 1-1.2: SerialNumber: ko058110
[ 2.951957] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.961202] usb 1-1.3: new full-speed USB device number 4 using dwc_otg
[ 3.035588] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.055881] init: - preinit -
[ 3.270438] usb 1-1.3: New USB device found, idVendor=231d, idProduct=0200
[ 3.279696] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.289240] usb 1-1.3: Product: VKB-Sim Gladiator NXT R
[ 3.296871] usb 1-1.3: Manufacturer: © Alex Oz 2012-2019
[ 3.305667] random: procd: uninitialized urandom read (4 bytes read)
[ 3.633402] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.678914] random: jshn: uninitialized urandom read (4 bytes read)
[ 7.337456] F2FS-fs (loop0): Mounted with checkpoint version = 5ccce293
[ 7.349206] mount_root: switching to f2fs overlay
[ 7.435785] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7.453823] urandom-seed: Seeding with /etc/urandom.seed
[ 7.536628] procd: - early -
[ 7.541973] procd: - watchdog -
[ 8.208668] procd: - watchdog -
[ 8.215497] procd: - ubus -
[ 8.277318] urandom_read: 1 callbacks suppressed
[ 8.277328] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.293623] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.302771] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.312628] procd: - init -
[ 8.859477] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.942890] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.980313] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.996659] urngd: jent-rng init failed, err: 2
[ 9.007794] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 9.025921] usbcore: registered new interface driver asix
[ 9.035292] usbcore: registered new interface driver ax88179_178a
[ 9.046987] Loading modules backported from Linux version v4.19.120-0-gfdc072324f3c
[ 9.058353] Backport generated by backports.git v4.19.120-1-0-g60c3a249
[ 9.070444] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.087312] nf_conntrack version 0.5.0 (7168 buckets, 28672 max)
[ 9.132415] usbcore: registered new interface driver r8152
[ 9.158587] xt_time: kernel timezone is -0000
[ 9.206919] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.373002] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
[ 9.389818] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.441057] firmware brcm!brcmfmac43430-sdio.raspberrypi,model-zero-w.txt: firmware_loading_store: map pages failed
[ 9.630602] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.644594] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.clm_blob failed with error -2
[ 9.659988] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.684247] firmware brcm!brcmfmac43430-sdio.clm_blob: firmware_loading_store: map pages failed
[ 9.699815] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
[ 9.720899] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[ 9.794945] usbcore: registered new interface driver brcmfmac
[ 9.853515] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 15.134521] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.990164] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 35.501553] random: crng init done
[ 35.508835] random: 3 urandom warning(s) missed due to ratelimiting
[ 196.234467] usb 1-1.3: reset full-speed USB device number 4 using dwc_otg
[ 196.694462] usb 1-1.3: reset full-speed USB device number 4 using dwc_otg
[ 198.474538] usb 1-1.2: reset full-speed USB device number 3 using dwc_otg
[ 198.934426] usb 1-1.2: reset full-speed USB device number 3 using dwc_otg
[ 483.264742] usb usb1-port1: disabled by hub (EMI?), re-enabling...
[ 483.274351] usb 1-1: USB disconnect, device number 2
[ 483.282595] usb 1-1.2: USB disconnect, device number 3
[ 483.292678] usb 1-1.3: USB disconnect, device number 4
[ 483.504729] Indeed it is in host mode hprt0 = 00001101
[ 483.724616] usb 1-1: new high-speed USB device number 5 using dwc_otg
[ 483.736057] Indeed it is in host mode hprt0 = 00001101
[ 484.464612] usb 1-1: device not accepting address 5, error -71
[ 484.473592] Indeed it is in host mode hprt0 = 00001101
[ 484.684620] usb 1-1: new high-speed USB device number 6 using dwc_otg
[ 484.694291] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 484.702816] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 484.711691] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 484.719988] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 484.728095] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 484.736492] Indeed it is in host mode hprt0 = 00001501
[ 484.874672] Indeed it is in host mode hprt0 = 00001101
[ 485.154687] Indeed it is in host mode hprt0 = 00001101
[ 485.504617] usb 1-1: device descriptor read/64, error -71
[ 485.624740] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 485.632810] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 485.641126] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 485.648962] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 485.656669] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 485.664823] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 485.672431] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 485.679892] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 485.687699] Indeed it is in host mode hprt0 = 00001101
[ 485.904637] usb 1-1: device descriptor read/64, error -71
[ 486.024731] usb usb1-port1: attempt power cycle
root@CloudHub_1e093d:~#

Konstruukt
After restarting my pi

After restarting my pi getting the following, and devices not visible any more:


root@CloudHub_1e093d:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180 (michael@ubuntu) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11063-85e04e9f46)) #0 Sat May 16 18:32:20 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x1ac00000
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c0826eec, node_mem_map dbc6a100
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 114688 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:4B:5C:68 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 430496K/458752K available (4436K kernel code, 157K rwdata, 1028K rodata, 1024K init, 327K bss, 11872K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xdc800000 - 0xff800000 ( 560 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0555268 (5429 kB)
[ 0.000000] .init : 0xc0700000 - 0xc0800000 (1024 kB)
[ 0.000000] .data : 0xc0800000 - 0xc08276c0 ( 158 kB)
[ 0.000000] .bss : 0xc082bdd0 - 0xc087db24 ( 328 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000028] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000065] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000145] bcm2835: system timer (irq = 27)
[ 0.000640] Console: colour dummy device 80x30
[ 0.001145] console [tty1] enabled
[ 0.001204] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060289] pid_max: default: 32768 minimum: 301
[ 0.060484] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060527] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.061237] CPU: Testing write buffer coherency: ok
[ 0.062016] Setting up static identity map for 0x100000 - 0x10005c
[ 0.069104] random: get_random_u32 called from bucket_table_alloc+0x160/0x1a8 with crng_init=0
[ 0.069493] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.069872] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.069935] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.071970] pinctrl core: initialized pinctrl subsystem
[ 0.073161] NET: Registered protocol family 16
[ 0.075755] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.081116] cpuidle: using governor ladder
[ 0.081175] cpuidle: using governor menu
[ 0.081691] Serial: AMBA PL011 UART driver
[ 0.084071] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[ 0.084739] uart-pl011 20201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.117006] bcm2835-dma 20007000.dma: DMA legacy API manager at dc80f000, dmachans=0x1
[ 0.119914] SCSI subsystem initialized
[ 0.120151] usbcore: registered new interface driver usbfs
[ 0.120266] usbcore: registered new interface driver hub
[ 0.120398] usbcore: registered new device driver usb
[ 0.130629] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-23 19:36
[ 0.132126] clocksource: Switched to clocksource timer
[ 0.140736] NET: Registered protocol family 2
[ 0.141650] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141763] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141853] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.142005] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142057] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142356] NET: Registered protocol family 1
[ 0.143775] Crashlog allocated RAM at address 0x3f00000
[ 0.144200] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.150412] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.153003] io scheduler noop registered
[ 0.153056] io scheduler deadline registered
[ 0.153440] io scheduler cfq registered (default)
[ 0.155653] BCM2708FB: allocated DMA memory 5ad00000
[ 0.155729] BCM2708FB: allocated DMA channel 0 @ dc80f000
[ 0.163712] Console: switching to colour frame buffer device 82x26
[ 0.172548] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.176940] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.183466] vc-sm: Videocore shared memory driver
[ 0.198615] brd: module loaded
[ 0.207267] loop: module loaded
[ 0.210267] usbcore: registered new interface driver smsc95xx
[ 0.213127] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.243902] dwc_otg 20980000.usb: base=0xf0980000
[ 0.446714] Core Release: 2.80a
[ 0.449379] Setting default values for core params
[ 0.452010] Finished setting default values for core params
[ 0.654791] Using Buffer DMA mode
[ 0.657410] Periodic Transfer Interrupt Enhancement - disabled
[ 0.659969] Multiprocessor Interrupt Enhancement - disabled
[ 0.662598] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.665244] Dedicated Tx FIFOs mode
[ 0.668743] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xdad14000 dma = 0x5ad14000 len=9024
[ 0.674442] FIQ FSM acceleration enabled for :
[ 0.674442] Non-periodic Split Transactions
[ 0.674442] Periodic Split Transactions
[ 0.674442] High-Speed Isochronous Endpoints
[ 0.674442] Interrupt/Control Split Transaction hack enabled
[ 0.687653] dwc_otg: Microframe scheduler enabled
[ 0.687854] WARN::hcd_init_fiq:459: FIQ on core 0 at 0xc03e48e4
[ 0.690530] WARN::hcd_init_fiq:460: FIQ ASM at 0xc03e4b6c length 36
[ 0.693161] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[ 0.695907] dwc_otg 20980000.usb: DWC OTG Controller
[ 0.698610] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[ 0.701346] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[ 0.704093] Init: Port Power? op_state=1
[ 0.706730] Init: Power Port (0)
[ 0.709560] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.712297] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.714979] usb usb1: Product: DWC OTG Controller
[ 0.717584] usb usb1: Manufacturer: Linux 4.14.180 dwc_otg_hcd
[ 0.720198] usb usb1: SerialNumber: 20980000.usb
[ 0.723591] hub 1-0:1.0: USB hub found
[ 0.726200] hub 1-0:1.0: 1 port detected
[ 0.729405] dwc_otg: FIQ enabled
[ 0.729414] dwc_otg: NAK holdoff enabled
[ 0.729419] dwc_otg: FIQ split-transaction FSM enabled
[ 0.729435] Module dwc_common_port init
[ 0.729905] usbcore: registered new interface driver uas
[ 0.732679] usbcore: registered new interface driver usb-storage
[ 0.735267] mousedev: PS/2 mouse device common for all mice
[ 0.737729] i2c /dev entries driver
[ 0.741058] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.744199] bcm2835-cpufreq: min=700000 max=1000000
[ 0.747485] sdhci: Secure Digital Host Controller Interface driver
[ 0.750140] sdhci: Copyright(c) Pierre Ossman
[ 0.753360] mmc-bcm2835 20300000.mmc: could not get clk, deferring probe
[ 0.756655] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
[ 0.759570] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.763998] vchiq: vchiq_init_state: slot_zero = dad80000, is_master = 0
[ 0.767875] [vc_sm_connected_init]: start
[ 0.777613] [vc_sm_connected_init]: end - returning 0
[ 0.780865] NET: Registered protocol family 10
[ 0.784437] Segment Routing with IPv6
[ 0.786487] NET: Registered protocol family 17
[ 0.788456] 8021q: 802.1Q VLAN Support v1.8
[ 0.796692] uart-pl011 20201000.serial: cts_event_workaround enabled
[ 0.798839] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.804625] console [ttyS0] disabled
[ 0.806813] 20215040.serial: ttyS0 at MMIO 0x0 (irq = 160, base_baud = 31250000) is a 16550
[ 1.590168] console [ttyS0] enabled
[ 1.597069] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.605258] mmc-bcm2835 20300000.mmc: DMA channel allocated
[ 1.673443] sdhost: log_buf @ dad13000 (5ad13000)
[ 1.717157] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.727323] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.737263] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.746806] random: fast init done
[ 1.753735] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.762191] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.770596] of_cfs_init
[ 1.775115] of_cfs_init: OK
[ 1.800876] Waiting for root device /dev/mmcblk0p2...
[ 1.902741] mmc1: new high speed SDIO card at address 0001
[ 1.923772] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.942344] mmc0: new high speed SDHC card at address aaaa
[ 1.950339] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 1.962997] mmcblk0: p1 p2
[ 1.989912] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 2.003057] Freeing unused kernel memory: 1024K
[ 2.359902] init: Console is alive
[ 2.365617] init: - watchdog -
[ 2.749481] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.822577] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.842512] init: - preinit -
[ 3.365557] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.409773] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.444157] random: jshn: uninitialized urandom read (4 bytes read)
[ 7.072964] F2FS-fs (loop0): Mounted with checkpoint version = 5ccce294
[ 7.084538] mount_root: switching to f2fs overlay
[ 7.168612] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7.186263] urandom-seed: Seeding with /etc/urandom.seed
[ 7.267040] procd: - early -
[ 7.273056] procd: - watchdog -
[ 7.932316] procd: - watchdog -
[ 7.938747] procd: - ubus -
[ 7.999749] urandom_read: 1 callbacks suppressed
[ 7.999759] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.015762] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.024787] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.034576] procd: - init -
[ 8.599190] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.678638] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.694706] urngd: jent-rng init failed, err: 2
[ 8.714309] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.726824] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 8.743707] usbcore: registered new interface driver asix
[ 8.752976] usbcore: registered new interface driver ax88179_178a
[ 8.764682] Loading modules backported from Linux version v4.19.120-0-gfdc072324f3c
[ 8.775970] Backport generated by backports.git v4.19.120-1-0-g60c3a249
[ 8.787862] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.804571] nf_conntrack version 0.5.0 (7168 buckets, 28672 max)
[ 8.848960] usbcore: registered new interface driver r8152
[ 8.874841] xt_time: kernel timezone is -0000
[ 8.922034] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.069780] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
[ 9.088403] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.140581] firmware brcm!brcmfmac43430-sdio.raspberrypi,model-zero-w.txt: firmware_loading_store: map pages failed
[ 9.329631] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.343599] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.clm_blob failed with error -2
[ 9.359025] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.382907] firmware brcm!brcmfmac43430-sdio.clm_blob: firmware_loading_store: map pages failed
[ 9.398434] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
[ 9.419380] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[ 9.493141] usbcore: registered new interface driver brcmfmac
[ 9.502301] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 14.626894] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.640824] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

Michael
.

What exactly are you plugging into the pi0w. Can you tell me the hub type/model and the usb devices

Konstruukt
VKB Gladiator NXT joystick

VKB Gladiator NXT joystick and Logitech X56 Throttle via a generic powered USB 2.0 hub that I had been using succesfully with these devices plugged directly into my computer via the hub.

The hub basically looks like this https://store.hrdistributors.com/v/vspfiles/photos/tripp_U222-004-R-2.jpg

Michael
.

Seems you are not pasting in all of the server log? For example i dont see virtualhere starting up and what devices it finds

Konstruukt
Do you mean the log from the

Do you mean the log from the client application?

Konstruukt
I just started up everything

I just started up everything again, the devices were visible, then disappeared once, reappeared, then disappeared and did not return.
System messages:

2021-01-19 15:56:38 INFO :VirtualHere Client 5.1.4 starting (Compiled: Dec 13 2020 20:13:07)
2021-01-19 15:56:38 INFO :Client OS is Windows 10 (build 19041), 64-bit edition
2021-01-19 15:56:38 INFO :Using config at C:\Users\Brian\AppData\Roaming\vhui.ini
2021-01-19 15:56:38 INFO :IPC available at \\.\pipe\vhclient
2021-01-19 15:56:38 INFO :Auto-find (Bonjour) on
2021-01-19 15:56:38 INFO :Auto-find (Bonjour SSL) on
2021-01-19 15:56:42 INFO :Drivers are up-to-date
2021-01-19 15:56:42 INFO :Connected to the VirtualHere Client Driver (Version 2)

dmesg output:

VirtualHere CloudHub_1e093d
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@CloudHub_1e093d:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180 (michael@ubuntu) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11063-85e04e9f46)) #0 Sat May 16 18:32:20 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x1ac00000
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c0826eec, node_mem_map dbc6a100
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 114688 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:4B:5C:68 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 430496K/458752K available (4436K kernel code, 157K rwdata, 1028K rodata, 1024K init, 327K bss, 11872K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xdc800000 - 0xff800000 ( 560 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0555268 (5429 kB)
[ 0.000000] .init : 0xc0700000 - 0xc0800000 (1024 kB)
[ 0.000000] .data : 0xc0800000 - 0xc08276c0 ( 158 kB)
[ 0.000000] .bss : 0xc082bdd0 - 0xc087db24 ( 328 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000029] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000068] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000148] bcm2835: system timer (irq = 27)
[ 0.000642] Console: colour dummy device 80x30
[ 0.001148] console [tty1] enabled
[ 0.001209] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060294] pid_max: default: 32768 minimum: 301
[ 0.060491] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060535] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.061249] CPU: Testing write buffer coherency: ok
[ 0.062021] Setting up static identity map for 0x100000 - 0x10005c
[ 0.069097] random: get_random_u32 called from bucket_table_alloc+0x160/0x1a8 with crng_init=0
[ 0.069490] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.069870] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.069932] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.071968] pinctrl core: initialized pinctrl subsystem
[ 0.073162] NET: Registered protocol family 16
[ 0.075750] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.081128] cpuidle: using governor ladder
[ 0.081187] cpuidle: using governor menu
[ 0.081701] Serial: AMBA PL011 UART driver
[ 0.084079] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[ 0.084750] uart-pl011 20201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.117030] bcm2835-dma 20007000.dma: DMA legacy API manager at dc80f000, dmachans=0x1
[ 0.119934] SCSI subsystem initialized
[ 0.120174] usbcore: registered new interface driver usbfs
[ 0.120291] usbcore: registered new interface driver hub
[ 0.120421] usbcore: registered new device driver usb
[ 0.130630] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-23 19:36
[ 0.132131] clocksource: Switched to clocksource timer
[ 0.140718] NET: Registered protocol family 2
[ 0.141630] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141743] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141834] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.141989] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142041] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142345] NET: Registered protocol family 1
[ 0.143763] Crashlog allocated RAM at address 0x3f00000
[ 0.144189] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.150378] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.152954] io scheduler noop registered
[ 0.153007] io scheduler deadline registered
[ 0.153391] io scheduler cfq registered (default)
[ 0.155608] BCM2708FB: allocated DMA memory 5ad00000
[ 0.155685] BCM2708FB: allocated DMA channel 0 @ dc80f000
[ 0.163666] Console: switching to colour frame buffer device 82x26
[ 0.172542] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.176981] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.183546] vc-sm: Videocore shared memory driver
[ 0.198672] brd: module loaded
[ 0.207277] loop: module loaded
[ 0.210333] usbcore: registered new interface driver smsc95xx
[ 0.213218] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.244015] dwc_otg 20980000.usb: base=0xf0980000
[ 0.446844] Core Release: 2.80a
[ 0.449524] Setting default values for core params
[ 0.452229] Finished setting default values for core params
[ 0.654977] Using Buffer DMA mode
[ 0.657554] Periodic Transfer Interrupt Enhancement - disabled
[ 0.660157] Multiprocessor Interrupt Enhancement - disabled
[ 0.662816] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.665473] Dedicated Tx FIFOs mode
[ 0.668938] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xdad14000 dma = 0x5ad14000 len=9024
[ 0.674591] FIQ FSM acceleration enabled for :
[ 0.674591] Non-periodic Split Transactions
[ 0.674591] Periodic Split Transactions
[ 0.674591] High-Speed Isochronous Endpoints
[ 0.674591] Interrupt/Control Split Transaction hack enabled
[ 0.687873] dwc_otg: Microframe scheduler enabled
[ 0.688068] WARN::hcd_init_fiq:459: FIQ on core 0 at 0xc03e48e4
[ 0.690700] WARN::hcd_init_fiq:460: FIQ ASM at 0xc03e4b6c length 36
[ 0.693365] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[ 0.696137] dwc_otg 20980000.usb: DWC OTG Controller
[ 0.698836] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[ 0.701571] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[ 0.704316] Init: Port Power? op_state=1
[ 0.706910] Init: Power Port (0)
[ 0.709759] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.712528] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.715215] usb usb1: Product: DWC OTG Controller
[ 0.717820] usb usb1: Manufacturer: Linux 4.14.180 dwc_otg_hcd
[ 0.720441] usb usb1: SerialNumber: 20980000.usb
[ 0.723796] hub 1-0:1.0: USB hub found
[ 0.726417] hub 1-0:1.0: 1 port detected
[ 0.729684] dwc_otg: FIQ enabled
[ 0.729693] dwc_otg: NAK holdoff enabled
[ 0.729698] dwc_otg: FIQ split-transaction FSM enabled
[ 0.729714] Module dwc_common_port init
[ 0.730187] usbcore: registered new interface driver uas
[ 0.732971] usbcore: registered new interface driver usb-storage
[ 0.735562] mousedev: PS/2 mouse device common for all mice
[ 0.738027] i2c /dev entries driver
[ 0.741281] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.744487] bcm2835-cpufreq: min=700000 max=1000000
[ 0.747784] sdhci: Secure Digital Host Controller Interface driver
[ 0.750434] sdhci: Copyright(c) Pierre Ossman
[ 0.753657] mmc-bcm2835 20300000.mmc: could not get clk, deferring probe
[ 0.756913] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
[ 0.759832] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.764284] vchiq: vchiq_init_state: slot_zero = dad80000, is_master = 0
[ 0.768154] [vc_sm_connected_init]: start
[ 0.777869] [vc_sm_connected_init]: end - returning 0
[ 0.781130] NET: Registered protocol family 10
[ 0.784705] Segment Routing with IPv6
[ 0.786757] NET: Registered protocol family 17
[ 0.788697] 8021q: 802.1Q VLAN Support v1.8
[ 0.796949] uart-pl011 20201000.serial: cts_event_workaround enabled
[ 0.799094] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.804873] console [ttyS0] disabled
[ 0.807009] 20215040.serial: ttyS0 at MMIO 0x0 (irq = 160, base_baud = 31250000) is a 16550
[ 1.590489] console [ttyS0] enabled
[ 1.597359] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.605541] mmc-bcm2835 20300000.mmc: DMA channel allocated
[ 1.613567] Indeed it is in host mode hprt0 = 00021501
[ 1.688912] random: fast init done
[ 1.733747] sdhost: log_buf @ dad13000 (5ad13000)
[ 1.777272] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.787405] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.797324] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.808474] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.822220] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.830703] of_cfs_init
[ 1.835221] of_cfs_init: OK
[ 1.840692] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.849558] Waiting for root device /dev/mmcblk0p2...
[ 1.856855] Indeed it is in host mode hprt0 = 00001101
[ 2.036603] mmc1: new high speed SDIO card at address 0001
[ 2.064020] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.083789] mmc0: new high speed SDHC card at address aaaa
[ 2.092032] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 2.105020] mmcblk0: p1 p2
[ 2.124358] usb 1-1: New USB device found, idVendor=05e3, idProduct=0605
[ 2.133183] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.142345] usb 1-1: Product: USB2.0 Hub
[ 2.149851] hub 1-1:1.0: USB hub found
[ 2.156442] hub 1-1:1.0: 4 ports detected
[ 2.164155] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 2.176252] Freeing unused kernel memory: 1024K
[ 2.469088] init: Console is alive
[ 2.475016] init: - watchdog -
[ 2.541680] usb 1-1.2: new full-speed USB device number 3 using dwc_otg
[ 2.893317] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.967354] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.987524] init: - preinit -
[ 3.122251] usb 1-1.2: device not accepting address 3, error -32
[ 3.312042] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[ 3.434455] usb 1-1.2: device descriptor read/64, error -32
[ 3.544908] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.590939] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.626363] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.662293] usb 1-1.2: device descriptor read/64, error -32
[ 3.782556] usb 1-1-port2: attempt power cycle
[ 4.442198] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[ 4.882198] usb 1-1.2: device not accepting address 5, error -32
[ 4.982252] usb 1-1.2: new full-speed USB device number 6 using dwc_otg
[ 5.432189] usb 1-1.2: device not accepting address 6, error -32
[ 5.441517] usb 1-1-port2: unable to enumerate USB device
[ 5.542200] usb 1-1.3: new full-speed USB device number 7 using dwc_otg
[ 5.652189] usb 1-1.3: device descriptor read/64, error -32
[ 5.872199] usb 1-1.3: device descriptor read/64, error -32
[ 6.312194] usb 1-1.3: new full-speed USB device number 8 using dwc_otg
[ 6.422198] usb 1-1.3: device descriptor read/64, error -32
[ 6.642196] usb 1-1.3: device descriptor read/64, error -32
[ 6.762734] usb 1-1-port3: attempt power cycle
[ 7.268025] F2FS-fs (loop0): Mounted with checkpoint version = 5ccce297
[ 7.279504] mount_root: switching to f2fs overlay
[ 7.365238] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7.382911] urandom-seed: Seeding with /etc/urandom.seed
[ 7.445479] usb 1-1.3: new full-speed USB device number 9 using dwc_otg
[ 7.474463] procd: - early -
[ 7.479654] procd: - watchdog -
[ 7.892193] usb 1-1.3: device not accepting address 9, error -71
[ 7.992201] usb 1-1.3: new full-speed USB device number 10 using dwc_otg
[ 8.144272] procd: - watchdog -
[ 8.150735] procd: - ubus -
[ 8.198605] urandom_read: 1 callbacks suppressed
[ 8.198615] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.215350] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.224374] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.234294] procd: - init -
[ 8.450090] usb 1-1.3: device not accepting address 10, error -32
[ 8.458875] usb 1-1-port3: unable to enumerate USB device
[ 8.809244] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.893738] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.924133] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.932335] urngd: jent-rng init failed, err: 2
[ 8.944325] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 8.961077] usbcore: registered new interface driver asix
[ 8.970486] usbcore: registered new interface driver ax88179_178a
[ 8.982251] Loading modules backported from Linux version v4.19.120-0-gfdc072324f3c
[ 8.993815] Backport generated by backports.git v4.19.120-1-0-g60c3a249
[ 9.005864] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.022637] nf_conntrack version 0.5.0 (7168 buckets, 28672 max)
[ 9.067040] usbcore: registered new interface driver r8152
[ 9.092991] xt_time: kernel timezone is -0000
[ 9.139794] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.287612] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
[ 9.306349] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.358640] firmware brcm!brcmfmac43430-sdio.raspberrypi,model-zero-w.txt: firmware_loading_store: map pages failed
[ 9.547648] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.561577] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.clm_blob failed with error -2
[ 9.576945] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.600761] firmware brcm!brcmfmac43430-sdio.clm_blob: firmware_loading_store: map pages failed
[ 9.615214] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
[ 9.636253] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[ 9.710525] usbcore: registered new interface driver brcmfmac
[ 9.767114] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 10.293049] dwc_otg_handle_wakeup_detected_intr lxstate = 2
[ 10.802270] usb 1-1.2: new full-speed USB device number 11 using dwc_otg
[ 10.997293] usb 1-1.2: New USB device found, idVendor=0738, idProduct=a221
[ 11.007170] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 11.017357] usb 1-1.2: Product: Saitek Pro Flight X-56 Rhino Throttle
[ 11.026597] usb 1-1.2: Manufacturer: Mad Catz
[ 11.033662] usb 1-1.2: SerialNumber: ko058110
[ 13.822273] usb 1-1.3: new full-speed USB device number 12 using dwc_otg
[ 13.979725] usb 1-1.3: New USB device found, idVendor=231d, idProduct=0200
[ 13.989353] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 13.999274] usb 1-1.3: Product: VKB-Sim Gladiator NXT R
[ 14.007261] usb 1-1.3: Manufacturer: © Alex Oz 2012-2019
[ 15.303580] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.867758] random: crng init done
[ 16.874467] random: 3 urandom warning(s) missed due to ratelimiting
[ 17.043448] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 27.231875] usb 1-1.3: reset full-speed USB device number 12 using dwc_otg
[ 27.471905] usb 1-1.2: reset full-speed USB device number 11 using dwc_otg
[ 27.711942] usb 1-1.3: reset full-speed USB device number 12 using dwc_otg
[ 28.071879] usb 1-1.2: reset full-speed USB device number 11 using dwc_otg
[ 53.050753] usb usb1-port1: disabled by hub (EMI?), re-enabling...
[ 53.059855] usb 1-1: USB disconnect, device number 2
[ 53.067571] usb 1-1.2: USB disconnect, device number 11
[ 53.077357] usb 1-1.3: USB disconnect, device number 12
[ 53.300815] Indeed it is in host mode hprt0 = 00001d01
[ 53.510698] usb 1-1: new high-speed USB device number 13 using dwc_otg
[ 53.520985] Indeed it is in host mode hprt0 = 00001101
[ 53.762601] usb 1-1: New USB device found, idVendor=05e3, idProduct=0605
[ 53.772249] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 53.782242] usb 1-1: Product: USB2.0 Hub
[ 53.793949] hub 1-1:1.0: USB hub found
[ 53.802183] hub 1-1:1.0: 4 ports detected
[ 54.120635] usb 1-1.2: new full-speed USB device number 14 using dwc_otg
[ 54.276343] usb 1-1.2: New USB device found, idVendor=0738, idProduct=a221
[ 54.286080] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 54.296174] usb 1-1.2: Product: Saitek Pro Flight X-56 Rhino Throttle
[ 54.305340] usb 1-1.2: Manufacturer: Mad Catz
[ 54.312242] usb 1-1.2: SerialNumber: ko058110
[ 54.420623] usb 1-1.3: new full-speed USB device number 15 using dwc_otg
[ 54.530616] usb 1-1.3: device descriptor read/64, error -32
[ 54.750614] usb 1-1.3: device descriptor read/64, error -32
[ 54.970630] usb 1-1.3: new full-speed USB device number 16 using dwc_otg
[ 55.080641] usb 1-1.3: device descriptor read/64, error -32
[ 55.300647] usb 1-1.3: device descriptor read/64, error -32
[ 55.420943] usb 1-1-port3: attempt power cycle
[ 56.080695] usb 1-1.3: new full-speed USB device number 17 using dwc_otg
[ 56.520777] usb 1-1.3: device not accepting address 17, error -32
[ 57.580666] usb 1-1.2: reset full-speed USB device number 14 using dwc_otg
[ 58.030704] usb 1-1.2: reset full-speed USB device number 14 using dwc_otg
[ 59.950743] usb 1-1.3: new full-speed USB device number 19 using dwc_otg
[ 60.097484] usb 1-1.3: New USB device found, idVendor=231d, idProduct=0200
[ 60.107207] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 60.117370] usb 1-1.3: Product: VKB-Sim Gladiator NXT R
[ 60.125725] usb 1-1.3: Manufacturer: © Alex Oz 2012-2019
[ 60.240847] usb 1-1.3: reset full-speed USB device number 19 using dwc_otg
[ 60.680846] usb 1-1.3: reset full-speed USB device number 19 using dwc_otg
[ 61.030726] usb 1-1.2: reset full-speed USB device number 14 using dwc_otg
[ 61.140724] usb 1-1.2: device descriptor read/64, error -71
[ 61.261321] usb 1-1-port2: cannot reset (err = -71)
[ 61.269027] usb 1-1-port2: cannot reset (err = -71)
[ 61.490937] hub 1-1:1.0: hub_ext_port_status failed (err = -71)
[ 61.499539] usb 1-1-port2: cannot reset (err = -71)
[ 61.507445] usb 1-1-port2: cannot reset (err = -71)
[ 61.514766] usb 1-1-port2: Cannot enable. Maybe the USB cable is bad?
[ 61.524353] usb 1-1-port2: cannot disable (err = -71)
[ 61.531856] usb 1-1-port2: cannot reset (err = -71)
[ 61.538588] usb 1-1-port2: cannot reset (err = -71)
[ 61.545591] usb 1-1-port2: cannot reset (err = -71)
[ 61.552390] usb 1-1-port2: cannot reset (err = -71)
[ 61.559452] usb 1-1-port2: cannot reset (err = -71)
[ 61.565880] usb 1-1-port2: Cannot enable. Maybe the USB cable is bad?
[ 61.575144] usb 1-1-port2: cannot reset (err = -71)
[ 61.582022] usb 1-1-port2: cannot reset (err = -71)
[ 61.588545] usb 1-1-port2: cannot reset (err = -71)
[ 61.810873] hub 1-1:1.0: hub_ext_port_status failed (err = -71)
[ 61.818729] usb 1-1-port2: cannot reset (err = -71)
[ 61.825461] usb 1-1-port2: Cannot enable. Maybe the USB cable is bad?
[ 61.834419] usb 1-1-port2: cannot disable (err = -71)
[ 61.841866] usb 1-1-port2: cannot reset (err = -71)
[ 61.848438] usb 1-1-port2: cannot reset (err = -71)
[ 61.855073] usb 1-1-port2: cannot reset (err = -71)
[ 61.861641] usb 1-1-port2: cannot reset (err = -71)
[ 61.868117] usb 1-1-port2: cannot reset (err = -71)
[ 61.874243] usb 1-1-port2: Cannot enable. Maybe the USB cable is bad?
[ 61.882788] usb 1-1-port2: cannot disable (err = -71)
[ 61.889194] usb 1-1-port2: cannot disable (err = -71)
[ 61.895896] hub 1-1:1.0: hub_ext_port_status failed (err = -71)
[ 63.635926] usb 1-1-port3: cannot reset (err = -71)
[ 63.642879] usb 1-1-port3: cannot reset (err = -71)
[ 63.649669] usb 1-1-port3: cannot reset (err = -71)
[ 63.657009] usb 1-1-port3: cannot reset (err = -71)
[ 63.663684] usb 1-1-port3: cannot reset (err = -71)
[ 63.669758] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
[ 63.678096] usb 1-1-port3: cannot disable (err = -71)
[ 63.685046] usb 1-1-port3: cannot reset (err = -71)
[ 63.691794] usb 1-1-port3: cannot reset (err = -71)
[ 63.698030] usb 1-1-port3: cannot reset (err = -71)
[ 63.704421] usb 1-1-port3: cannot reset (err = -71)
[ 63.710501] usb 1-1-port3: cannot reset (err = -71)
[ 63.716476] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
[ 63.724527] usb 1-1-port3: cannot disable (err = -71)
[ 63.731258] usb 1-1-port3: cannot reset (err = -71)
[ 63.737472] usb 1-1-port3: cannot reset (err = -71)
[ 63.743964] usb 1-1-port3: cannot reset (err = -71)
[ 63.750210] usb 1-1-port3: cannot reset (err = -71)
[ 63.756634] usb 1-1-port3: cannot reset (err = -71)
[ 63.762650] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
[ 63.770575] usb 1-1-port3: cannot disable (err = -71)
[ 63.777044] usb 1-1-port3: cannot reset (err = -71)
[ 63.783373] usb 1-1-port3: cannot reset (err = -71)
[ 63.789452] usb 1-1-port3: cannot reset (err = -71)
[ 63.795786] usb 1-1-port3: cannot reset (err = -71)
[ 63.802165] usb 1-1-port3: cannot reset (err = -71)
[ 63.808027] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
[ 63.815957] usb 1-1-port3: cannot disable (err = -71)
[ 63.822422] usb 1-1-port3: cannot disable (err = -71)
[ 63.828714] hub 1-1:1.0: hub_ext_port_status failed (err = -71)
[ 63.836613] hub 1-1:1.0: hub_ext_port_status failed (err = -71)
[ 65.800942] usb usb1-port1: disabled by hub (EMI?), re-enabling...
[ 65.808856] usb 1-1: USB disconnect, device number 13
[ 65.815583] usb 1-1.2: USB disconnect, device number 14
[ 65.823750] usb 1-1.3: USB disconnect, device number 19
[ 66.030892] Indeed it is in host mode hprt0 = 00001101
[ 66.240822] usb 1-1: new high-speed USB device number 20 using dwc_otg
[ 66.249452] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.257188] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.265363] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.273065] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.280547] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.288768] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.296321] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.303810] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.313013] Indeed it is in host mode hprt0 = 00001101
[ 66.530863] usb 1-1: device descriptor read/64, error -71
[ 66.651363] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.659098] Indeed it is in host mode hprt0 = 00001101
[ 66.870807] usb 1-1: device descriptor read/64, error -71
[ 66.990993] Indeed it is in host mode hprt0 = 00001101
[ 67.200854] usb 1-1: new high-speed USB device number 21 using dwc_otg
[ 67.210171] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 67.218107] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 67.226448] Indeed it is in host mode hprt0 = 00001101
[ 67.420811] usb 1-1: device descriptor read/64, error -71
[ 67.541120] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 67.549082] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 67.556875] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 67.564600] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 67.572851] Indeed it is in host mode hprt0 = 00001101
[ 67.780913] usb 1-1: device descriptor read/64, error -71
[ 67.900922] usb usb1-port1: attempt power cycle
root@CloudHub_1e093d:~#

Konstruukt
I rebooted the pi after

I rebooted the pi after removing the X56 throttle, when it came up the VKB stick was not visible in client, dmesg output:
\
VirtualHere CloudHub_1e093d
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@CloudHub_1e093d:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180 (michael@ubuntu) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11063-85e04e9f46)) #0 Sat May 16 18:32:20 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x1ac00000
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c0826eec, node_mem_map dbc6a100
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 114688 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:4B:5C:68 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 430496K/458752K available (4436K kernel code, 157K rwdata, 1028K rodata, 1024K init, 327K bss, 11872K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xdc800000 - 0xff800000 ( 560 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0555268 (5429 kB)
[ 0.000000] .init : 0xc0700000 - 0xc0800000 (1024 kB)
[ 0.000000] .data : 0xc0800000 - 0xc08276c0 ( 158 kB)
[ 0.000000] .bss : 0xc082bdd0 - 0xc087db24 ( 328 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000029] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000067] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000149] bcm2835: system timer (irq = 27)
[ 0.000643] Console: colour dummy device 80x30
[ 0.001147] console [tty1] enabled
[ 0.001207] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060292] pid_max: default: 32768 minimum: 301
[ 0.060488] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060531] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.061240] CPU: Testing write buffer coherency: ok
[ 0.062020] Setting up static identity map for 0x100000 - 0x10005c
[ 0.069099] random: get_random_u32 called from bucket_table_alloc+0x160/0x1a8 with crng_init=0
[ 0.069493] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.069871] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.069932] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.071968] pinctrl core: initialized pinctrl subsystem
[ 0.073160] NET: Registered protocol family 16
[ 0.075749] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.081114] cpuidle: using governor ladder
[ 0.081173] cpuidle: using governor menu
[ 0.081691] Serial: AMBA PL011 UART driver
[ 0.084077] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[ 0.084743] uart-pl011 20201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.117037] bcm2835-dma 20007000.dma: DMA legacy API manager at dc80f000, dmachans=0x1
[ 0.119940] SCSI subsystem initialized
[ 0.120171] usbcore: registered new interface driver usbfs
[ 0.120288] usbcore: registered new interface driver hub
[ 0.120419] usbcore: registered new device driver usb
[ 0.130630] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-23 19:36
[ 0.132131] clocksource: Switched to clocksource timer
[ 0.140717] NET: Registered protocol family 2
[ 0.141635] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141749] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141840] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.141994] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142047] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142351] NET: Registered protocol family 1
[ 0.143767] Crashlog allocated RAM at address 0x3f00000
[ 0.144189] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.150385] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.152983] io scheduler noop registered
[ 0.153038] io scheduler deadline registered
[ 0.153425] io scheduler cfq registered (default)
[ 0.155634] BCM2708FB: allocated DMA memory 5ad00000
[ 0.155710] BCM2708FB: allocated DMA channel 0 @ dc80f000
[ 0.163695] Console: switching to colour frame buffer device 82x26
[ 0.172718] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.177194] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.183692] vc-sm: Videocore shared memory driver
[ 0.198822] brd: module loaded
[ 0.207505] loop: module loaded
[ 0.210572] usbcore: registered new interface driver smsc95xx
[ 0.213426] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.244187] dwc_otg 20980000.usb: base=0xf0980000
[ 0.446972] Core Release: 2.80a
[ 0.449608] Setting default values for core params
[ 0.452315] Finished setting default values for core params
[ 0.655071] Using Buffer DMA mode
[ 0.657703] Periodic Transfer Interrupt Enhancement - disabled
[ 0.660320] Multiprocessor Interrupt Enhancement - disabled
[ 0.662971] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.665583] Dedicated Tx FIFOs mode
[ 0.669050] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xdad14000 dma = 0x5ad14000 len=9024
[ 0.674774] FIQ FSM acceleration enabled for :
[ 0.674774] Non-periodic Split Transactions
[ 0.674774] Periodic Split Transactions
[ 0.674774] High-Speed Isochronous Endpoints
[ 0.674774] Interrupt/Control Split Transaction hack enabled
[ 0.688005] dwc_otg: Microframe scheduler enabled
[ 0.688208] WARN::hcd_init_fiq:459: FIQ on core 0 at 0xc03e48e4
[ 0.690894] WARN::hcd_init_fiq:460: FIQ ASM at 0xc03e4b6c length 36
[ 0.693572] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[ 0.696339] dwc_otg 20980000.usb: DWC OTG Controller
[ 0.698986] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[ 0.701725] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[ 0.704478] Init: Port Power? op_state=1
[ 0.707111] Init: Power Port (0)
[ 0.709984] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.712750] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.715385] usb usb1: Product: DWC OTG Controller
[ 0.717975] usb usb1: Manufacturer: Linux 4.14.180 dwc_otg_hcd
[ 0.720590] usb usb1: SerialNumber: 20980000.usb
[ 0.723981] hub 1-0:1.0: USB hub found
[ 0.726634] hub 1-0:1.0: 1 port detected
[ 0.729837] dwc_otg: FIQ enabled
[ 0.729846] dwc_otg: NAK holdoff enabled
[ 0.729851] dwc_otg: FIQ split-transaction FSM enabled
[ 0.729867] Module dwc_common_port init
[ 0.730322] usbcore: registered new interface driver uas
[ 0.733053] usbcore: registered new interface driver usb-storage
[ 0.735650] mousedev: PS/2 mouse device common for all mice
[ 0.738114] i2c /dev entries driver
[ 0.741432] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.744652] bcm2835-cpufreq: min=700000 max=1000000
[ 0.747891] sdhci: Secure Digital Host Controller Interface driver
[ 0.750518] sdhci: Copyright(c) Pierre Ossman
[ 0.753743] mmc-bcm2835 20300000.mmc: could not get clk, deferring probe
[ 0.757043] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
[ 0.759977] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.764394] vchiq: vchiq_init_state: slot_zero = dad80000, is_master = 0
[ 0.768236] [vc_sm_connected_init]: start
[ 0.777982] [vc_sm_connected_init]: end - returning 0
[ 0.781197] NET: Registered protocol family 10
[ 0.784742] Segment Routing with IPv6
[ 0.786794] NET: Registered protocol family 17
[ 0.788746] 8021q: 802.1Q VLAN Support v1.8
[ 0.797020] uart-pl011 20201000.serial: cts_event_workaround enabled
[ 0.799119] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.804903] console [ttyS0] disabled
[ 0.807079] 20215040.serial: ttyS0 at MMIO 0x0 (irq = 160, base_baud = 31250000) is a 16550
[ 1.590468] console [ttyS0] enabled
[ 1.597358] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.605500] mmc-bcm2835 20300000.mmc: DMA channel allocated
[ 1.673448] sdhost: log_buf @ dad13000 (5ad13000)
[ 1.718220] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.728387] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.738325] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.747708] random: fast init done
[ 1.754642] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.762206] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.770590] of_cfs_init
[ 1.775108] of_cfs_init: OK
[ 1.800887] Waiting for root device /dev/mmcblk0p2...
[ 1.903848] mmc1: new high speed SDIO card at address 0001
[ 1.924413] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.944265] mmc0: new high speed SDHC card at address aaaa
[ 1.953309] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 1.966150] mmcblk0: p1 p2
[ 1.989487] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 2.001434] Freeing unused kernel memory: 1024K
[ 2.319386] init: Console is alive
[ 2.325143] init: - watchdog -
[ 2.709132] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.781969] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.801959] init: - preinit -
[ 3.367262] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.412429] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.446521] random: jshn: uninitialized urandom read (4 bytes read)
[ 7.070954] F2FS-fs (loop0): Mounted with checkpoint version = 5ccce298
[ 7.082836] mount_root: switching to f2fs overlay
[ 7.166306] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7.184074] urandom-seed: Seeding with /etc/urandom.seed
[ 7.265528] procd: - early -
[ 7.270725] procd: - watchdog -
[ 7.929829] procd: - watchdog -
[ 7.936461] procd: - ubus -
[ 7.997552] urandom_read: 1 callbacks suppressed
[ 7.997564] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.013596] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.022640] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.032439] procd: - init -
[ 8.578751] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.658604] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.694121] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.706992] urngd: jent-rng init failed, err: 2
[ 8.718054] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 8.735923] usbcore: registered new interface driver asix
[ 8.745207] usbcore: registered new interface driver ax88179_178a
[ 8.756825] Loading modules backported from Linux version v4.19.120-0-gfdc072324f3c
[ 8.768177] Backport generated by backports.git v4.19.120-1-0-g60c3a249
[ 8.780054] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.796859] nf_conntrack version 0.5.0 (7168 buckets, 28672 max)
[ 8.840916] usbcore: registered new interface driver r8152
[ 8.866792] xt_time: kernel timezone is -0000
[ 8.913910] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.049771] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
[ 9.066561] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.116982] firmware brcm!brcmfmac43430-sdio.raspberrypi,model-zero-w.txt: firmware_loading_store: map pages failed
[ 9.306029] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.319958] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.clm_blob failed with error -2
[ 9.335312] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.359263] firmware brcm!brcmfmac43430-sdio.clm_blob: firmware_loading_store: map pages failed
[ 9.373736] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
[ 9.394747] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[ 9.468620] usbcore: registered new interface driver brcmfmac
[ 9.524680] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 14.579068] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.487861] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
root@CloudHub_1e093d:~#

Then I tried with just the X56 throttle:

VirtualHere CloudHub_1e093d
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@CloudHub_1e093d:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180 (michael@ubuntu) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11063-85e04e9f46)) #0 Sat May 16 18:32:20 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x1ac00000
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c0826eec, node_mem_map dbc6a100
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 114688 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:4B:5C:68 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 430496K/458752K available (4436K kernel code, 157K rwdata, 1028K rodata, 1024K init, 327K bss, 11872K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xdc800000 - 0xff800000 ( 560 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0555268 (5429 kB)
[ 0.000000] .init : 0xc0700000 - 0xc0800000 (1024 kB)
[ 0.000000] .data : 0xc0800000 - 0xc08276c0 ( 158 kB)
[ 0.000000] .bss : 0xc082bdd0 - 0xc087db24 ( 328 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000028] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000067] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000146] bcm2835: system timer (irq = 27)
[ 0.000639] Console: colour dummy device 80x30
[ 0.001145] console [tty1] enabled
[ 0.001205] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060290] pid_max: default: 32768 minimum: 301
[ 0.060487] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060532] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.061246] CPU: Testing write buffer coherency: ok
[ 0.062022] Setting up static identity map for 0x100000 - 0x10005c
[ 0.069108] random: get_random_u32 called from bucket_table_alloc+0x160/0x1a8 with crng_init=0
[ 0.069501] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.069882] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.069946] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.071978] pinctrl core: initialized pinctrl subsystem
[ 0.073174] NET: Registered protocol family 16
[ 0.075767] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.081114] cpuidle: using governor ladder
[ 0.081174] cpuidle: using governor menu
[ 0.081687] Serial: AMBA PL011 UART driver
[ 0.084068] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[ 0.084739] uart-pl011 20201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.117017] bcm2835-dma 20007000.dma: DMA legacy API manager at dc80f000, dmachans=0x1
[ 0.119927] SCSI subsystem initialized
[ 0.120164] usbcore: registered new interface driver usbfs
[ 0.120279] usbcore: registered new interface driver hub
[ 0.120411] usbcore: registered new device driver usb
[ 0.130627] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-23 19:36
[ 0.132125] clocksource: Switched to clocksource timer
[ 0.140691] NET: Registered protocol family 2
[ 0.141605] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141719] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141810] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.141964] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142015] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142316] NET: Registered protocol family 1
[ 0.143737] Crashlog allocated RAM at address 0x3f00000
[ 0.144166] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.150356] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.152940] io scheduler noop registered
[ 0.152993] io scheduler deadline registered
[ 0.153373] io scheduler cfq registered (default)
[ 0.155586] BCM2708FB: allocated DMA memory 5ad00000
[ 0.155662] BCM2708FB: allocated DMA channel 0 @ dc80f000
[ 0.163648] Console: switching to colour frame buffer device 82x26
[ 0.172678] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.177141] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.183619] vc-sm: Videocore shared memory driver
[ 0.198744] brd: module loaded
[ 0.207392] loop: module loaded
[ 0.210455] usbcore: registered new interface driver smsc95xx
[ 0.213277] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.244055] dwc_otg 20980000.usb: base=0xf0980000
[ 0.446813] Core Release: 2.80a
[ 0.449463] Setting default values for core params
[ 0.452097] Finished setting default values for core params
[ 0.654891] Using Buffer DMA mode
[ 0.657512] Periodic Transfer Interrupt Enhancement - disabled
[ 0.660123] Multiprocessor Interrupt Enhancement - disabled
[ 0.662744] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.665369] Dedicated Tx FIFOs mode
[ 0.668842] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xdad14000 dma = 0x5ad14000 len=9024
[ 0.674566] FIQ FSM acceleration enabled for :
[ 0.674566] Non-periodic Split Transactions
[ 0.674566] Periodic Split Transactions
[ 0.674566] High-Speed Isochronous Endpoints
[ 0.674566] Interrupt/Control Split Transaction hack enabled
[ 0.687791] dwc_otg: Microframe scheduler enabled
[ 0.687987] WARN::hcd_init_fiq:459: FIQ on core 0 at 0xc03e48e4
[ 0.690673] WARN::hcd_init_fiq:460: FIQ ASM at 0xc03e4b6c length 36
[ 0.693356] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[ 0.696089] dwc_otg 20980000.usb: DWC OTG Controller
[ 0.698754] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[ 0.701493] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[ 0.704235] Init: Port Power? op_state=1
[ 0.706871] Init: Power Port (0)
[ 0.709737] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.712476] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.715125] usb usb1: Product: DWC OTG Controller
[ 0.717734] usb usb1: Manufacturer: Linux 4.14.180 dwc_otg_hcd
[ 0.720356] usb usb1: SerialNumber: 20980000.usb
[ 0.723762] hub 1-0:1.0: USB hub found
[ 0.726413] hub 1-0:1.0: 1 port detected
[ 0.729602] dwc_otg: FIQ enabled
[ 0.729611] dwc_otg: NAK holdoff enabled
[ 0.729616] dwc_otg: FIQ split-transaction FSM enabled
[ 0.729631] Module dwc_common_port init
[ 0.730089] usbcore: registered new interface driver uas
[ 0.732852] usbcore: registered new interface driver usb-storage
[ 0.735446] mousedev: PS/2 mouse device common for all mice
[ 0.737912] i2c /dev entries driver
[ 0.741242] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.744455] bcm2835-cpufreq: min=700000 max=1000000
[ 0.747675] sdhci: Secure Digital Host Controller Interface driver
[ 0.750328] sdhci: Copyright(c) Pierre Ossman
[ 0.753549] mmc-bcm2835 20300000.mmc: could not get clk, deferring probe
[ 0.756849] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
[ 0.759787] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.764189] vchiq: vchiq_init_state: slot_zero = dad80000, is_master = 0
[ 0.768054] [vc_sm_connected_init]: start
[ 0.777785] [vc_sm_connected_init]: end - returning 0
[ 0.780987] NET: Registered protocol family 10
[ 0.784544] Segment Routing with IPv6
[ 0.786595] NET: Registered protocol family 17
[ 0.788546] 8021q: 802.1Q VLAN Support v1.8
[ 0.796818] uart-pl011 20201000.serial: cts_event_workaround enabled
[ 0.798932] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.804716] console [ttyS0] disabled
[ 0.806894] 20215040.serial: ttyS0 at MMIO 0x0 (irq = 160, base_baud = 31250000) is a 16550
[ 1.590289] console [ttyS0] enabled
[ 1.597163] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.605317] mmc-bcm2835 20300000.mmc: DMA channel allocated
[ 1.674439] sdhost: log_buf @ dad13000 (5ad13000)
[ 1.719047] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.728374] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.737507] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.747556] random: fast init done
[ 1.753193] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.762201] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.770443] of_cfs_init
[ 1.774977] of_cfs_init: OK
[ 1.780582] Waiting for root device /dev/mmcblk0p2...
[ 1.901868] mmc1: new high speed SDIO card at address 0001
[ 1.923810] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.942441] mmc0: new high speed SDHC card at address aaaa
[ 1.950486] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 1.963107] mmcblk0: p1 p2
[ 1.999472] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 2.011486] Freeing unused kernel memory: 1024K
[ 2.329490] init: Console is alive
[ 2.335206] init: - watchdog -
[ 2.719227] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.792024] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.812014] init: - preinit -
[ 3.377864] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.423658] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.457520] random: jshn: uninitialized urandom read (4 bytes read)
[ 7.080552] F2FS-fs (loop0): Mounted with checkpoint version = 5ccce299
[ 7.092387] mount_root: switching to f2fs overlay
[ 7.175576] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7.193405] urandom-seed: Seeding with /etc/urandom.seed
[ 7.274780] procd: - early -
[ 7.279989] procd: - watchdog -
[ 7.939111] procd: - watchdog -
[ 7.945644] procd: - ubus -
[ 7.992099] urandom_read: 1 callbacks suppressed
[ 7.998800] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.008514] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.017531] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.027331] procd: - init -
[ 8.583781] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.653704] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.690098] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.700868] urngd: jent-rng init failed, err: 2
[ 8.712973] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 8.729627] usbcore: registered new interface driver asix
[ 8.738873] usbcore: registered new interface driver ax88179_178a
[ 8.750515] Loading modules backported from Linux version v4.19.120-0-gfdc072324f3c
[ 8.761840] Backport generated by backports.git v4.19.120-1-0-g60c3a249
[ 8.773832] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.790261] nf_conntrack version 0.5.0 (7168 buckets, 28672 max)
[ 8.834466] usbcore: registered new interface driver r8152
[ 8.860202] xt_time: kernel timezone is -0000
[ 8.907595] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.055313] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
[ 9.073901] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.126273] firmware brcm!brcmfmac43430-sdio.raspberrypi,model-zero-w.txt: firmware_loading_store: map pages failed
[ 9.315355] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.329334] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.clm_blob failed with error -2
[ 9.344770] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.368498] firmware brcm!brcmfmac43430-sdio.clm_blob: firmware_loading_store: map pages failed
[ 9.383955] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
[ 9.404963] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[ 9.479193] usbcore: registered new interface driver brcmfmac
[ 9.534722] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 14.657198] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.791966] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 60.157481] random: crng init done
[ 60.164739] random: 3 urandom warning(s) missed due to ratelimiting
root@CloudHub_1e093d:~#

Michael
.

Looks like you have an electrical (usb cable or hub problem) .

All those emi and cannot reset message usually mean that. Try another hub (separately powered)

Konstruukt
Do you mean hub looks to be

Do you mean hub looks to be under powered?

Michael
.

Yes do you have another hub that you can try?

Konstruukt
Seems to be working reliably

Seems to be working reliably so far with different hub. Thanks.

root@CloudHub_1e093d:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180 (michael@ubuntu) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11063-85e04e9f46)) #0 Sat May 16 18:32:20 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x1ac00000
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c0826eec, node_mem_map dbc6a100
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 114688 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:4B:5C:68 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 430496K/458752K available (4436K kernel code, 157K rwdata, 1028K rodata, 1024K init, 327K bss, 11872K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xdc800000 - 0xff800000 ( 560 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0555268 (5429 kB)
[ 0.000000] .init : 0xc0700000 - 0xc0800000 (1024 kB)
[ 0.000000] .data : 0xc0800000 - 0xc08276c0 ( 158 kB)
[ 0.000000] .bss : 0xc082bdd0 - 0xc087db24 ( 328 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000028] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000067] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000147] bcm2835: system timer (irq = 27)
[ 0.000640] Console: colour dummy device 80x30
[ 0.001145] console [tty1] enabled
[ 0.001205] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060290] pid_max: default: 32768 minimum: 301
[ 0.060489] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060532] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.061242] CPU: Testing write buffer coherency: ok
[ 0.062019] Setting up static identity map for 0x100000 - 0x10005c
[ 0.069114] random: get_random_u32 called from bucket_table_alloc+0x160/0x1a8 with crng_init=0
[ 0.069508] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.069889] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.069951] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.071971] pinctrl core: initialized pinctrl subsystem
[ 0.073170] NET: Registered protocol family 16
[ 0.075761] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.081117] cpuidle: using governor ladder
[ 0.081176] cpuidle: using governor menu
[ 0.081690] Serial: AMBA PL011 UART driver
[ 0.084075] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[ 0.084743] uart-pl011 20201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.117024] bcm2835-dma 20007000.dma: DMA legacy API manager at dc80f000, dmachans=0x1
[ 0.119933] SCSI subsystem initialized
[ 0.120167] usbcore: registered new interface driver usbfs
[ 0.120281] usbcore: registered new interface driver hub
[ 0.120411] usbcore: registered new device driver usb
[ 0.130620] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-23 19:36
[ 0.132116] clocksource: Switched to clocksource timer
[ 0.140700] NET: Registered protocol family 2
[ 0.141617] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141731] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141821] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.141975] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142026] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142327] NET: Registered protocol family 1
[ 0.143747] Crashlog allocated RAM at address 0x3f00000
[ 0.144172] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.150369] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.152956] io scheduler noop registered
[ 0.153009] io scheduler deadline registered
[ 0.153398] io scheduler cfq registered (default)
[ 0.155615] BCM2708FB: allocated DMA memory 5ad00000
[ 0.155691] BCM2708FB: allocated DMA channel 0 @ dc80f000
[ 0.163678] Console: switching to colour frame buffer device 82x26
[ 0.172573] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.177057] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.183592] vc-sm: Videocore shared memory driver
[ 0.198734] brd: module loaded
[ 0.207318] loop: module loaded
[ 0.210381] usbcore: registered new interface driver smsc95xx
[ 0.213257] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.244050] dwc_otg 20980000.usb: base=0xf0980000
[ 0.446874] Core Release: 2.80a
[ 0.449545] Setting default values for core params
[ 0.452219] Finished setting default values for core params
[ 0.654942] Using Buffer DMA mode
[ 0.657569] Periodic Transfer Interrupt Enhancement - disabled
[ 0.660189] Multiprocessor Interrupt Enhancement - disabled
[ 0.662845] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.665508] Dedicated Tx FIFOs mode
[ 0.668949] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xdad14000 dma = 0x5ad14000 len=9024
[ 0.674627] FIQ FSM acceleration enabled for :
[ 0.674627] Non-periodic Split Transactions
[ 0.674627] Periodic Split Transactions
[ 0.674627] High-Speed Isochronous Endpoints
[ 0.674627] Interrupt/Control Split Transaction hack enabled
[ 0.687864] dwc_otg: Microframe scheduler enabled
[ 0.688061] WARN::hcd_init_fiq:459: FIQ on core 0 at 0xc03e48e4
[ 0.690744] WARN::hcd_init_fiq:460: FIQ ASM at 0xc03e4b6c length 36
[ 0.693427] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[ 0.696200] dwc_otg 20980000.usb: DWC OTG Controller
[ 0.698901] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[ 0.701624] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[ 0.704320] Init: Port Power? op_state=1
[ 0.706953] Init: Power Port (0)
[ 0.709822] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.712586] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.715268] usb usb1: Product: DWC OTG Controller
[ 0.717872] usb usb1: Manufacturer: Linux 4.14.180 dwc_otg_hcd
[ 0.720439] usb usb1: SerialNumber: 20980000.usb
[ 0.723816] hub 1-0:1.0: USB hub found
[ 0.726471] hub 1-0:1.0: 1 port detected
[ 0.729748] dwc_otg: FIQ enabled
[ 0.729757] dwc_otg: NAK holdoff enabled
[ 0.729762] dwc_otg: FIQ split-transaction FSM enabled
[ 0.729778] Module dwc_common_port init
[ 0.730252] usbcore: registered new interface driver uas
[ 0.733027] usbcore: registered new interface driver usb-storage
[ 0.735599] mousedev: PS/2 mouse device common for all mice
[ 0.738016] i2c /dev entries driver
[ 0.741345] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.744558] bcm2835-cpufreq: min=700000 max=1000000
[ 0.747851] sdhci: Secure Digital Host Controller Interface driver
[ 0.750514] sdhci: Copyright(c) Pierre Ossman
[ 0.753702] mmc-bcm2835 20300000.mmc: could not get clk, deferring probe
[ 0.756990] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
[ 0.759946] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.764408] vchiq: vchiq_init_state: slot_zero = dad80000, is_master = 0
[ 0.768287] [vc_sm_connected_init]: start
[ 0.777961] [vc_sm_connected_init]: end - returning 0
[ 0.781216] NET: Registered protocol family 10
[ 0.784770] Segment Routing with IPv6
[ 0.786791] NET: Registered protocol family 17
[ 0.788732] 8021q: 802.1Q VLAN Support v1.8
[ 0.797022] uart-pl011 20201000.serial: cts_event_workaround enabled
[ 0.799166] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.804877] console [ttyS0] disabled
[ 0.807063] 20215040.serial: ttyS0 at MMIO 0x0 (irq = 160, base_baud = 31250000) is a 16550
[ 1.590550] console [ttyS0] enabled
[ 1.597459] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.605648] mmc-bcm2835 20300000.mmc: DMA channel allocated
[ 1.613712] Indeed it is in host mode hprt0 = 00021501
[ 1.689171] random: fast init done
[ 1.734779] sdhost: log_buf @ dad13000 (5ad13000)
[ 1.780850] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.790147] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.799323] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.809721] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.822208] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.830594] of_cfs_init
[ 1.835099] of_cfs_init: OK
[ 1.840507] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.849151] Indeed it is in host mode hprt0 = 00001101
[ 1.916567] Waiting for root device /dev/mmcblk0p2...
[ 2.037001] mmc1: new high speed SDIO card at address 0001
[ 2.057638] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.076136] mmc0: new high speed SDHC card at address aaaa
[ 2.084268] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 2.096932] mmcblk0: p1 p2
[ 2.103978] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
[ 2.112763] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.121925] usb 1-1: Product: USB 2.0 Hub
[ 2.128629] hub 1-1:1.0: USB hub found
[ 2.135367] hub 1-1:1.0: 4 ports detected
[ 2.144732] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 2.156863] Freeing unused kernel memory: 1024K
[ 2.478206] init: Console is alive
[ 2.484145] init: - watchdog -
[ 2.550827] usb 1-1.4: new full-speed USB device number 3 using dwc_otg
[ 2.733365] usb 1-1.4: New USB device found, idVendor=231d, idProduct=0200
[ 2.742612] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.752192] usb 1-1.4: Product: VKB-Sim Gladiator NXT R
[ 2.759787] usb 1-1.4: Manufacturer: © Alex Oz 2012-2019
[ 2.931462] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.005130] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.025272] init: - preinit -
[ 3.555593] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.600794] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.635733] random: jshn: uninitialized urandom read (4 bytes read)
[ 6.256924] F2FS-fs (loop0): Mounted with checkpoint version = 5ccce2a0
[ 6.268432] mount_root: switching to f2fs overlay
[ 6.354169] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 6.371868] urandom-seed: Seeding with /etc/urandom.seed
[ 6.454331] procd: - early -
[ 6.459542] procd: - watchdog -
[ 7.124332] procd: - watchdog -
[ 7.130765] procd: - ubus -
[ 7.192566] urandom_read: 1 callbacks suppressed
[ 7.192576] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.208657] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.217693] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.227508] procd: - init -
[ 7.789784] kmodloader: loading kernel modules from /etc/modules.d/*
[ 7.874942] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.901931] urngd: jent-rng init failed, err: 2
[ 7.913553] hidraw: raw HID events driver (C) Jiri Kosina
[ 7.927199] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 7.944268] usbcore: registered new interface driver asix
[ 7.953596] usbcore: registered new interface driver ax88179_178a
[ 7.965378] Loading modules backported from Linux version v4.19.120-0-gfdc072324f3c
[ 7.976743] Backport generated by backports.git v4.19.120-1-0-g60c3a249
[ 7.988652] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.005572] nf_conntrack version 0.5.0 (7168 buckets, 28672 max)
[ 8.050802] usbcore: registered new interface driver r8152
[ 8.077188] xt_time: kernel timezone is -0000
[ 8.125213] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 8.261860] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
[ 8.278675] brcmfmac mmc1:0001:1: Falling back to user helper
[ 8.329819] firmware brcm!brcmfmac43430-sdio.raspberrypi,model-zero-w.txt: firmware_loading_store: map pages failed
[ 8.519456] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 8.533489] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.clm_blob failed with error -2
[ 8.548949] brcmfmac mmc1:0001:1: Falling back to user helper
[ 8.573443] firmware brcm!brcmfmac43430-sdio.clm_blob: firmware_loading_store: map pages failed
[ 8.587871] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
[ 8.608978] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[ 8.681916] usbcore: registered new interface driver brcmfmac
[ 8.738334] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 13.957164] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.872546] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.792227] usb 1-1.4: reset full-speed USB device number 3 using dwc_otg
[ 25.252213] usb 1-1.4: reset full-speed USB device number 3 using dwc_otg
[ 25.624800] random: crng init done
[ 25.631894] random: 3 urandom warning(s) missed due to ratelimiting
[ 48.282238] usb 1-1.3: new full-speed USB device number 4 using dwc_otg
[ 48.438984] usb 1-1.3: New USB device found, idVendor=0738, idProduct=a221
[ 48.449756] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 48.460775] usb 1-1.3: Product: Saitek Pro Flight X-56 Rhino Throttle
[ 48.470835] usb 1-1.3: Manufacturer: Mad Catz
[ 48.478635] usb 1-1.3: SerialNumber: ko058110
[ 48.602210] usb 1-1.3: reset full-speed USB device number 4 using dwc_otg
[ 49.062236] usb 1-1.3: reset full-speed USB device number 4 using dwc_otg
root@CloudHub_1e093d:~#

Konstruukt
perhaps spoke too soon, in

perhaps spoke too soon, in second session of usage the pi went away mid flight, leaving me unable to control my ship in Elite Dangerous :(

Michael
.

I suggest you invest in another pi. I dont think your pi0w is physically working properly.

Konstruukt
Will you comp a license for

Will you comp a license for the replacement unit? this is the main thing that has me trying to get it working befgore changing hardware

Michael
.
Konstruukt
Email sent

Email sent

Log in or register to post comments