Virtual here server closes as soon as it's open

12 posts / 0 new
Last post
jigglywiggly
Virtual here server closes as soon as it's open

I am on Win10 10.0.19042.685
I have hyper-v enabled, not sure if that affects this.
10850k, 64gb of ram, gtx 1070.

As soon as I open virtual here usb server, it displays for a quater of a second and then closes. It is not running in the system tray.
I don't see any logs either.

jigglywiggly
Nevermind, a reboot has it

Nevermind, a reboot has it working.

jigglywiggly
Well there is a new problem,

Well there is a new problem, I can't share my stm32 NUCLEO-G070RB
On the server it says device is in use, but that shouldn't be the case. There are no drivers installed for it on the server.
I know it should be passable because it can be passed via vmware when I tried(vmware is not running right now).

jigglywiggly
2020-12-18 12:20:41 INFO :>>>

2020-12-18 12:20:41 INFO :>>> Starting VirtualHere USB Server v4.2.0 (Built: Jul 27 2020, 11:39:23)<<<
2020-12-18 12:20:41 INFO :Using configuration \\192.168.1.157\SyncPrv\Downloads\config.ini
2020-12-18 12:20:41 INFO :Server licensed to=unlicensed max_devices=1
2020-12-18 12:20:41 ERROR :Error starting server
2020-12-18 12:20:41 INFO :>>> Shutdown <<<
2020-12-18 12:21:01 INFO :>>> Starting VirtualHere USB Server v4.2.0 (Built: Jul 27 2020, 11:39:23)<<<
2020-12-18 12:21:01 INFO :Using configuration \\192.168.1.157\SyncPrv\Downloads\config.ini
2020-12-18 12:21:01 INFO :Server licensed to=unlicensed max_devices=1
2020-12-18 12:21:01 ERROR :Error starting server
2020-12-18 12:21:01 INFO :>>> Shutdown <<<
2020-12-18 12:21:08 INFO :>>> Starting VirtualHere USB Server v4.2.0 (Built: Jul 27 2020, 11:39:23)<<<
2020-12-18 12:21:08 INFO :Using configuration C:\Users\jiggl\Desktop\config.ini
2020-12-18 12:21:08 INFO :Server licensed to=unlicensed max_devices=1
2020-12-18 12:21:08 ERROR :Error starting server
2020-12-18 12:21:08 INFO :>>> Shutdown <<<
2020-12-18 12:21:30 INFO :>>> Starting VirtualHere USB Server v4.2.0 (Built: Jul 27 2020, 11:39:23)<<<
2020-12-18 12:21:30 INFO :Using configuration C:\Users\jiggl\Desktop\config.ini
2020-12-18 12:21:30 INFO :Server licensed to=unlicensed max_devices=1
2020-12-18 12:21:30 ERROR :Error starting server
2020-12-18 12:21:30 INFO :>>> Shutdown <<<
2020-12-18 12:21:34 INFO :>>> Starting VirtualHere USB Server v4.2.0 (Built: Jul 27 2020, 11:39:23)<<<
2020-12-18 12:21:34 INFO :Using configuration C:\Users\jiggl\Desktop\config.ini
2020-12-18 12:21:34 INFO :Server licensed to=unlicensed max_devices=1
2020-12-18 12:21:34 ERROR :Error starting server
2020-12-18 12:21:34 INFO :>>> Shutdown <<<
2020-12-18 12:21:50 INFO :>>> Starting VirtualHere USB Server v4.2.0 (Built: Jul 27 2020, 11:39:23)<<<
2020-12-18 12:21:50 INFO :Using configuration C:\Users\jiggl\Desktop\config.ini
2020-12-18 12:21:50 INFO :Server licensed to=unlicensed max_devices=1
2020-12-18 12:21:50 ERROR :Error starting server
2020-12-18 12:21:50 INFO :>>> Shutdown <<<
2020-12-18 14:06:47 INFO :>>> Starting VirtualHere USB Server v4.2.0 (Built: Jul 27 2020, 11:39:23)<<<
2020-12-18 14:06:47 INFO :Using configuration C:\Users\jiggl\Desktop\config.ini
2020-12-18 14:06:47 INFO :Server licensed to=unlicensed max_devices=1
2020-12-18 14:06:47 ERROR :Error starting server
2020-12-18 14:06:47 INFO :>>> Shutdown <<<
2020-12-18 14:08:13 INFO :>>> Starting VirtualHere USB Server v4.2.0 (Built: Jul 27 2020, 11:39:23)<<<
2020-12-18 14:08:13 INFO :Using configuration C:\Users\jiggl\Desktop\config.ini
2020-12-18 14:08:13 INFO :Server licensed to=unlicensed max_devices=1
2020-12-18 14:08:13 INFO :Listening on all network interfaces at TCP port 7575 (IPv6 dual-stack)
2020-12-18 14:08:13 INFO :Found Full speed device [056a:0317] "Wacom Co.,Ltd., Intuos5 touch L" at address 1
2020-12-18 14:08:13 INFO :Found Full speed device [0a12:1004] "0x0a12, Avantree Priva III" at address 2
2020-12-18 14:08:13 INFO :Found Full speed device [046d:c53f] "Logitech, USB Receiver" at address 3
2020-12-18 14:08:13 INFO :Found Full speed device [0a5c:21e8] "Broadcom Corp, BCM920702 Bluetooth 4.0" at address 4
2020-12-18 14:08:13 INFO :Found Full speed device [051d:0002] "American Power Conversion, Back-UPS XS 1500M FW:947.d10 .D USB FW:d10 " at address 5
2020-12-18 14:08:13 INFO :Found Full speed device [1462:7c75] "MSI, MYSTIC LIGHT " at address 6
2020-12-18 14:08:13 INFO :Found High speed device [046d:0825] "0x046d, 0x0825" at address 7
2020-12-18 14:08:13 INFO :Found High speed device [0403:6014] "Digilent, Digilent USB Device" at address 8
2020-12-18 14:08:13 INFO :Found Full speed device [0483:374b] "STMicroelectronics, STM32 STLink" at address 9
2020-12-18 14:08:13 INFO :Found Full speed device [0403:6001] "FTDI, FT232R USB UART" at address 10
2020-12-18 14:09:30 INFO :192.168.1.74 connected as connection 1
2020-12-18 14:09:56 INFO :Installing driver for class USB {36FC9E60-C465-11CF-8056-444553540000}
2020-12-18 14:09:56 INFO :OK driver installed try again...
2020-12-18 14:09:56 ERROR :Cannot capture device because it is currently in use at the server. Please exit the program that is using the device, then try again. (USB\VID_0483&PID_374B\0670FF313736504157234316)
2020-12-18 14:09:57 ERROR :Cannot capture device because it is currently in use at the server. Please exit the program that is using the device, then try again. (USB\VID_0483&PID_374B\0670FF313736504157234316)
2020-12-18 14:09:57 ERROR :Error binding device 9 [0483:374b] to connection 1, BIND_ERROR
2020-12-18 14:10:01 ERROR :Cannot capture device because it is currently in use at the server. Please exit the program that is using the device, then try again. (USB\VID_0483&PID_374B\0670FF313736504157234316)
2020-12-18 14:10:01 ERROR :Cannot capture device because it is currently in use at the server. Please exit the program that is using the device, then try again. (USB\VID_0483&PID_374B\0670FF313736504157234316)
2020-12-18 14:10:01 ERROR :Error binding device 9 [0483:374b] to connection 1, BIND_ERROR
2020-12-18 14:10:10 ERROR :Cannot capture device because it is currently in use at the server. Please exit the program that is using the device, then try again. (USB\VID_0483&PID_374B\0670FF313736504157234316)
2020-12-18 14:10:10 ERROR :Cannot capture device because it is currently in use at the server. Please exit the program that is using the device, then try again. (USB\VID_0483&PID_374B\0670FF313736504157234316)
2020-12-18 14:10:10 ERROR :Error binding device 9 [0483:374b] to connection 1, BIND_ERROR
2020-12-18 14:13:59 ERROR :Cannot capture device because it is currently in use at the server. Please exit the program that is using the device, then try again. (USB\VID_0483&PID_374B\0670FF313736504157234316)
2020-12-18 14:14:00 ERROR :Cannot capture device because it is currently in use at the server. Please exit the program that is using the device, then try again. (USB\VID_0483&PID_374B\0670FF313736504157234316)
2020-12-18 14:14:00 ERROR :Error binding device 9 [0483:374b] to connection 1, BIND_ERROR

Michael
.

OK, try this build of the server. Exit the current server and download and run this https://www.virtualhere.com/sites/default/files/usbserver/vhusbdwindk64.exe

jigglywiggly
Awesome, it works. I was

Awesome, it works. I was going to buy it now, but the licensing seems weird. It's per server, so if you reformat, does it not work anymore?

Michael
.

Yeah VirtualHere is for a server which means its fixed and not for moving.

jigglywiggly
So just for clarification, is

So just for clarification, is the license tied to the os install, usb hub, or usb controller or all of them?

Michael
.

The server on windows is tied to the OS install.

jigglywiggly
I see, thanks. Is it also

I see, thanks. Is it also tied to the os install if I use a rasberry pi 4?

Michael
.

All other platforms are tied to the hardware (including the pi).

So you can change the sdcard/os etc and put the license key in again and it will still be licensed.

The pi4 is a good platform for a USB server and i recommend that.

jigglywiggly
Great, I will likely buy that

Great, I will likely buy that then for the pi. Not too much chance of the pi failing.

Log in or register to post comments