I'm trying to passthrough my DDJ-FLX-4 from one windows PC to another; I've got the server running and the client, and they work perfectly when passing through other USB devices. I connected my DDJ-FLX4 to the server, which then pops up on the client side. When selecting "use this device" it works for about 5 seconds before the server crashes and the hub disappears from the client list. When checking the logs it shows the following:
2024-01-07 21:01:48 INFO :>>> Starting VirtualHere USB Server v4.6.0 (Built: Oct 5 2023, 08:46:27)<<<
2024-01-07 21:01:48 WARNING :Warning, tried finding HOME directory but that also failed, config.ini will be loaded from pwd
2024-01-07 21:01:48 INFO :Using configuration config.ini
2024-01-07 21:01:52 INFO :Found High speed device [2b895:11499] "AlphaTheta Corporation, DDJ-FLX4" at address 6
2024-01-07 21:02:11 INFO :192.123.4.56 connected as connection 1 (Standard TCP)
2024-01-07 21:02:43 INFO :Device 6 [2b895:11499] BOUND to connection 1
2024-01-07 21:02:46 ERROR :Error 1784 submiting iso to ep 0x01, The supplied user buffer is not valid for the requested operation. (0x000006f8)
What am I doing wrong here?
.
Might be important; I'm connecting my DDJ-FLX4 with a USB type A to USB type C cable, as the DDJ-FLX4 only has USB type C ports. Does VirtualHere not support USB type C?
.
Are you using virtualhere server from the Microsoft Store ? if not , try that version
.
Yeah that's the one I'm using :/
.
OK try the one from this website. Stop and exit the windows store one if it is running
.
That fixed it! This program is absolutely amazing
.
Great!
(It must use some non-standard request which the microsoft store version doesnt support, but this website version does.)