VH-Client in a VM (Debian Jessie 8.2.0) on a QNAP-NAS

Submitted by pauker on #1

I run a Pi2 as Virtualhere-Server (unlimited license) with 3 devices for receiving and sending telegrams for my homeautomation.

Til now I had a Pi3 with Jessie and Virtualhere-Client and the FHEM-Software running. It was running smooth except some hanging of the system because of the known kernelbug.

Now I set up a VM on a QNAP installed the Virtualhere-Client as a service and I can bind the devices to the VM.

On the console I see:
Raspberry Hub (pijessi2:7575)
--> RFXtrx433 (pijessi2.1141) (In-use by you)
--> CUL868 (pijessi2.1122) (In-use by you)
--> USB2.0-Serial (pijessi2.113) (In-use by you)

... and
root@K6-FHEM:~# ls -l /dev/serial/by-id
insgesamt 0
lrwxrwxrwx 1 root root 13 Okt 19 19:49 usb-1a86_USB2.0-Serial-if00-port0 -> ../../ttyUSB1
lrwxrwxrwx 1 root root 13 Okt 19 19:38 usb-busware.de_CUL868-if00 -> ../../ttyACM0
lrwxrwxrwx 1 root root 13 Okt 19 19:49 usb-RFXCOM_RFXtrx433_A1WXPS4Q-if00-port0 -> ../../ttyUSB0

Can you help me anyhow?

Reimer

Submitted by pauker on Thu, 2016/10/20 - 15:22

#3

So far as I've written, all is o.k.

But the Software FHEM which need the three transceivers tells me that the devices are 'disconnected'. That's my problem.

Submitted by Michael on Thu, 2016/10/20 - 19:49

#4

My suggestion would be to use screen or cu and see what the serial port returns.