Dear friend.
I applied your program using "tl-wr902ac".
Connected computers are "2017 27inch imac " and wifi spec " 802.11ac ".
"tl-wr902ac" and "imac" are directly connected.
However, the transmission speed is very low, about 4.0Mb/s.
This translates to a speed of about 32 Mbps.
The specification of "tl-wr902ac" is "802.11ac" and supports up to 433Mbps.
The speed of 32Mbps is considered to be the lowest rate of the "802.11ac" standard.
I will test the adapter with a higher standard.(802.11ac - 867Mbps)
I wonder if there is a way to adjust it with your program settings.
thank you~!
.
Hi, if you use wifi there is a lot of extra latency in the network (especially if the channel is crowded). To resolve this
1. Use the LAN cable connection instead
2. Switch to a channel that is less crowded, use a Android App e.g https://play.google.com/store/apps/details?id=com.farproc.wifi.analyzer… and switch to that channel
.
Thanks for the quick reply.
I connect the dlsr camera to usb on "tl-wr902ac"
The computer's wifi is directly connected to tl-wr902ac (cloudhub _ ******).
It is not related to the surrounding wifi signal.
What I want to ask is whether I can adjust the bandwidth or other settings of "tl-wr902ac" in the virtualHere program.
.
Yes its very likely the wifi signal, all wifi uses the same set of channels, you need to choose one with the least traffic on it. Thats all you can do, or use a LAN cable...