SERVER INFO client API

Submitted by caseyboardman on #1

I'm running client 4.4.8 and am connected to a server version 3.5.4.

In the gui, right clicking on the server, and then clicking properties, I get a bunch of server information (which is nice).

Running `/vhclientx86_64 -t "SERVER INFO,usbetht1-deb9-64"` (for example), I get nothing. I tried it from both mac and linux. I was hoping to get the same info as in GUI.

Any thoughts? I tried it with/without port, and using the IP address.

Submitted by Michael on Tue, 2018/03/27 - 19:07

#2

Hi Casey, actually for this command it is the server name as shown in the first column in the list command

e.g 

C:\Users\michael>vhui64.exe -t list

C:\Users\michael>VirtualHere Client IPC, below are the available devices:
(Value in brackets = address, * = Auto-Use)

CloudHub_Pi0w (CloudHub_5dc001:7575)
QNAP Hub (QNAP:7575)
   --> Token JC (QNAP.11) (In-use by:michael (michael) at 192.168.0.50)
CloudHub_NEXX (CloudHub_a10196:7575)
   --> 2307 Boot ROM            (CloudHub_a10196.11)
CloudHub_Pi3 (CloudHub_0145b3:7575)
   --> iLok (CloudHub_0145b3.112)
Synology Hub (synology:17570)
   --> eLicenser (synology.11)
CloudHub_MR3040 (CloudHub_f7a1f4:7575)
   --> CP2102 USB to UART Bridge Controller (CloudHub_f7a1f4.11)
CloudHub_WR902AC (CloudHub_c183f5:7575)
   --> TOSHIBA USB DRV (CloudHub_c183f5.11)
 (readynas.local.:7575)
 (CloudHub_233d26.local.:7574)
ASUSTOR Hub (ASUS:7575)
   --> Ultra USB 3.0 (ASUS.54)

Auto-Find currently on
Auto-Use All currently off
Reverse Lookup currently on
VirtualHere Client not running as a service

C:\Users\michael\>vhui64.exe -t "SERVER INFO,Synology Hub"

NAME: Synology Hub
VERSION: 3.6.0
STATE: Logged in
ADDRESS: synology-2.local. (192.168.0.8)
PORT: 17570
CONNECTED FOR: 8 sec
MAX DEVICES: unlimited
CONNECTION ID: 6
INTERFACE: eth0
SERIAL NUMBER: 0011322115bd