BSOD when connecting client

My set up
RSP400 supporting SDRplay Software defined receiver..... wifi to windows 10 pro box running SDRConsole
This seems to work ok (occasional blue screen - actually its green)

However I forwarded a port in my firewall to pass through 7575 to the net and I have a win10 proPC at a remote location with vhui client.
When Vhui launches i can "use this device" ok But when I launch the SDR software and connect to the Vhui I get a BSOD immediately

Pc has all latest win 10 updates.

All ideas will be appreciated

#2

I should have been clearer the Pi has Virtual here server and both PCs have Vhui client

#3

Before you use the device in the virtualhere client can you right click USB Hubs->About->Statistics. What does that graph generally show?

#4

Interesting!
Latency on my Local WLAN client is a saw tooth range like a bread knife VVVVVVV from about 4ms up to 100 and back again but on my remote PC on the net latency is very smooth with on a few small kicks around 12-15ms

#5

Actually after leaving it a few minutes to ruun the latency on the internet connected device is also now saw toothed (but less so) at 12 -90MS

#6

Im wondering if the driver is expecting some data at < 12ms. It still shouldnt cause a BSOD however.

Can you download and run this https://www.nirsoft.net/utils/blue_screen_view.html bluescreen analyzer and tell me the driver it crashed in