Stuck on initializing 80% windows 8.1 64

Hi, trying to run server on windows 8.1 64, stuck on initializing 80%. log said that drivers are installed, and last thing is registatrion call. I can succesfully connect with client, server log also tells that client has conncted, but its always stuck on 80% and cannot click on START button.

Cheers,
P.

#2

In the log does it say "Installing USB stub driver..." and "Installed USB Stub driver" or does it just the first message?

#3

fresh log

2016-06-10 11:07:33 INFO :>>> Starting VirtualHere USB Server v2.8.9 (Built: Jun 4 2016, 21:56:12)<<<
2016-06-10 11:07:33 INFO :Using configuration config.ini
2016-06-10 11:07:33 INFO :Server licensed to=unlicensed max_devices=1
2016-06-10 11:07:34 INFO :Installed USB monitor driver
2016-06-10 11:07:34 INFO :Installed USB monitor service
2016-06-10 11:07:34 INFO :Installing USB stub driver...
2016-06-10 11:07:34 INFO :Installed USB Stub driver
2016-06-10 11:07:34 INFO :TCPServer starting...
2016-06-10 11:07:34 INFO :Listening on all network interfaces at port 7575 (IPv6 dual-stack)
2016-06-10 11:07:34 INFO :Registration called

and stopped on initialiing 80%....

P.

#4

ok, the next windows server build will be released next week which should fix this issue.

#6

hey, just tried the new version, works! got a windows prompt about installing the drivers, successfully connected with client and with a mouse on server,. BU I wanted to connect to Logitech Driving force gt, and no luck with that :/

MY log:

2016-06-13 19:09:19 INFO :>>> Starting VirtualHere USB Server v2.9.0 (Built: Jun 13 2016, 18:45:42)<<<
2016-06-13 19:09:19 INFO :Using configuration config.ini
2016-06-13 19:09:19 INFO :Server licensed to=unlicensed max_devices=1
2016-06-13 19:09:19 INFO :TCPServer starting...
2016-06-13 19:09:19 INFO :Listening on all network interfaces at port 7575 (IPv6 dual-stack)
2016-06-13 19:09:19 INFO :Registration called
2016-06-13 19:09:20 INFO :Found Full speed device [046d:c29a] "0x046d, Driving Force GT" at address 10
2016-06-13 19:09:20 INFO :Found High speed device [0bda:0139] "Generic, USB2.0-CRW" at address 3
2016-06-13 19:09:20 INFO :Found High speed device [04f2:b3d8] "Chicony Electronics Co.,Ltd., USB2.0 HD UVC WebCam" at address 4
2016-06-13 19:09:20 INFO :Found Full speed device [13d3:3402] "Atheros Communications, Bluetooth USB Host Controller" at address 5
2016-06-13 19:09:39 INFO :fe80::51b8:d56e:5bd7:adf3 connected
2016-06-13 19:10:09 ERROR :Error binding device 10 [046d:c29a] to connection 1, BIND_ERROR

Any ideas?

#7

OK, you need to download 2.9.1 of the windows server then right click on the Wheel in the virtualhere client and select "Custom Event Handler..." and enter the line exactly as shown below:

onReset.$VENDOR_ID$.$PRODUCT_ID$=

then click OK

Now try to use the wheel

#8

no change, still the same error

My log

2016-06-14 21:38:20 INFO :>>> Starting VirtualHere USB Server v2.9.1 (Built: Jun 14 2016, 16:30:25)<<<
2016-06-14 21:38:20 INFO :Using configuration config.ini
2016-06-14 21:38:20 INFO :Server licensed to=unlicensed max_devices=1
2016-06-14 21:38:20 INFO :TCPServer starting...
2016-06-14 21:38:20 INFO :Listening on all network interfaces at port 7575 (IPv6 dual-stack)
2016-06-14 21:38:20 INFO :Registration called
2016-06-14 21:38:22 INFO :Found Full speed device [046d:c52f] "Logitech, USB Receiver" at address 1
2016-06-14 21:38:22 INFO :Found High speed device [0bda:0139] "Generic, USB2.0-CRW" at address 2
2016-06-14 21:38:22 INFO :Found High speed device [04f2:b3d8] "Chicony Electronics Co.,Ltd., USB2.0 HD UVC WebCam" at address 3
2016-06-14 21:38:22 INFO :Found Full speed device [13d3:3402] "Atheros Communications, Bluetooth USB Host Controller" at address 4
2016-06-14 21:38:22 INFO :Found Full speed device [046d:c29a] "0x046d, Driving Force GT" at address 5
2016-06-14 21:38:38 INFO :fe80::51b8:d56e:5bd7:adf3 connected
2016-06-14 21:39:09 INFO :Set custom event "onReset.046d.c29a="
2016-06-14 21:39:13 ERROR :Error binding device 5 [046d:c29a] to connection 2, BIND_ERROR

#11

2.9.2 + onReset.$VENDOR_ID$.$PRODUCT_ID$= did the trick! All works perfectly! thanks!

#12

hi,
same issue with message : "please wait initializing 80%"

Here is my log :
2019-07-10 21:54:37 INFO :>>> Starting VirtualHere USB Server v3.9.5 (Built: Jun 19 2019, 11:36:51)<<<
2019-07-10 21:54:37 INFO :Using configuration C:\Users\habib\Desktop\config.ini
2019-07-10 21:54:37 INFO :Server licensed to=unlicensed max_devices=1
2019-07-10 21:54:37 INFO :Listening on all network interfaces at TCP port 7575 (IPv6 dual-stack)

Could you help me ?

#13

hi,
Same issue for me.
Here is my log, could you help me ?
2019-07-10 21:54:37 INFO :>>> Starting VirtualHere USB Server v3.9.5 (Built: Jun 19 2019, 11:36:51)<<<
2019-07-10 21:54:37 INFO :Using configuration C:\Users\habib\Desktop\config.ini
2019-07-10 21:54:37 INFO :Server licensed to=unlicensed max_devices=1
2019-07-10 21:54:37 INFO :Listening on all network interfaces at TCP port 7575 (IPv6 dual-stack)

#14

Use windows 10