Windows server 2003 - Drivers Unsigned

Hi, sorry for my english (im French)

i have a prompt message, when i launch vhui32.exe:

16:43:06 INFO :Drivers are up-to-date
16:43:06 ERROR :Hub failed to open error 0x00000103
17:04:23 INFO :Drivers are up-to-date
17:04:23 ERROR :Hub failed to open error 0x00000103

Im Administrator and, in system proprietes i have check "Ignore dirvers unsigned"

Please Help

#2

You might have forgot to say yes to all the security dialogs that popup.

Go to "Add Remove Programs", uninstall the vhusbd and vhhcd drivers if they are there.

Reboot your machine.

Run the vhui.exe program again and say yes to any dialogs that popup. Reboot afterwards and it should work.

I have tested it on my win2003 box and it does work however it is a bit confusing all the security popups and it did require a reboot. Please try again and let me know how it goes.

#5

The drivers are inside the client. Try running the client and it will install the drivers

Are you the developer? Can you send me the drivers? PLEASE i want use your solution, and purchase a licence if all work fine.

I have reboot 3 times
I have running the client and it not install the drivers after the first lauch

Please help me

#9

Thomas i cannot send you the drivers separately as they are part of the client already. They are compiled inside it. what service pack are you running? You *must* run with the latest service pack as that will update the installed root certificates. Please note that you are using a very old windows which is no longer supported by microsoft and no service packs have been released for 3 years. I suggest you install virtualhere on something more modern.

In reply to by ironwolf

#11

I think it issue is you did not click yes to the the permission dialogs that appeared when you initially ran the virtualhere client.

To fix this issue:

1. Go to Control Panel -> Programs and Features and uninstall all "Windows Driver Installer VirtualHere..." programs
2. Reboot your computer
3. Run virtualhere and share a device. It will then attempt to install the drivers.
4. Please observe the taskbar and it will flash a permission dialog. Click Yes to this.
5. ANOTHER permission dialog will appear after that that asks to run "VirtualHere USB Enumerator" please click Yes to this

It should work now.

#12

Hi! Thanks a lot for such a great software! It works perfectly with my sticker printer connected to HP ThinClient t5135 with lubuntu mini onboard, Windows7 x64 as a client.

Unfortunately, I discovered the same problem as described above with Windows Server 2003 (x32) drivers. I have tried to uninstall all VirtualHere software, rebooted, and run the program again. All the same, "Hub failed to open error 0x00000103" and I see VirtualHere USB Host Controller driver is ok in the device manager, but VirtualHere USB root hub status is "This device is not configured correctly. (Code 1)". I thought I should try to repeat uninstall exactly as advised here, but now I can't even find any VirtualHere soft in "Add or Remove Programs". Manual driver uninstall in device manager doesn't solve the problem too.

Any suggestions would be greatly appreciated!

#13

Hi Woodl, yes the virtualhere drivers dont seem to work with win2003 for some reason. its a too old operating system so im focusing on windows xp, 7 and 8 compatibility at the moment. If i have spare time i will do further testing on 2003

#14

Thank you for reply! I guess windows xp compatible driver should work with server2003, at least almost all drivers do... Would you please make windows XP and/or Server2003 USB root hub driver available for a separate download, so we can try to find out some workaround?

#15

I tried installing virtualhere on windows 2003 server R2 x32 and it installed fine. What exact version of windows 2003 server do you have and ill test on that?

#18

OK i installed Windows 2003 Server with SP2 (not R2) and I reproduced the problem. The issue is that, that version of windows does not support the signing certificate i use for signing the kernel mode drivers. Therefore it does not allow them to be used and causes a 103 error. VirtualHere will support Windows Server 2003 R2 as that uses the new certifcate method. So unfortunately windows 2003 Server will not work with VirtualHere only R2 will.

#20

For some reason I have to use Windows 2003. Where can I download a client for this version of the operating system?
Will it work on the latest version of the server running on Windows 7 64?

#21

Sorry i dont want to support 2003 anymore because microsoft doesnt support it. You need at least win7 or 2008r2

It wont work because the authenticode certificates are no longer updated by microsoft in win2003 so anything signed in the last few years wont work. Aswell. virtualhere now uses some API's that were added since win2003