USB device: Aeotec Stick Gen5 (ZW050x_USB_VCP_ PC_Driver (https://aeotec.com/z-wave-usb-stick)
Client hardware: MacOS 10.14.3
VH Client version: 4.6.5
#1) I am unable to properly mount the USB device on the client Mac. When connected directly to the Mac, the USB device appears as
/dev/cu.usbmodemxxxxx and /dev/tty.usbmodemxxxxx
However, when using VH the devices are not created in /dev
The OS-X system reporter shows:
Product ID: 0x0200
Vendor ID: 0x0658 (Sigma Designs, Inc.)
Speed: Up to 12 Mb/sec
Location ID: 0x14300000 / 27
Current Available (mA): 500
Extra Operating Current (mA): 0
By the way, Aeotec reports this on their web site:
"The Z-Stick Gen5 now uses UZB drivers instead of Silabs UART to USB. There is no need to install the UZB drivers in OSX and Linux as these OS already have drivers that will allow the use of the Z-Stick Gen5 without the UZB drivers. For further support materials, please refer to our support section."
#2) The CloudServer Advanced properties include an option to "Update Firmware..." However, I cannot find such firmware on your site. Presumably, the system image linked in the install instructions is current. But, where else would I look to check if there were new versions?
Thanks for the help... I am looking forward to getting this working as it will solve a number of problems.