If easyfind is not working then you have a firewall in between. EasyFind wont work through firewalls.
EasyFind makes it easy to connect if you dont have a static IP and you are behind a NAT.
However EasyFind wont work through firewalls, therefore if you want it to work though a firewall you need to open UDP port 443
.
If easyfind is not working then you have a firewall in between. EasyFind wont work through firewalls.
EasyFind makes it easy to connect if you dont have a static IP and you are behind a NAT.
However EasyFind wont work through firewalls, therefore if you want it to work though a firewall you need to open UDP port 443
I am behind NAT.
I am behind NAT.
I opened UDP port 443 and temporarily disabled firewalls
Did not work
.
You are in russia or china? Its quite possible it is being blocked by their firewall
.
Ukraine
.
OK well something is blocking it. Try using something like zerotier. I think that has relays which you need
.
badly .
how can you check what is blocking?
.
OK i went through the logs and i can see your server is connecting on to the easyfind system.
(The easyfind server is in San Francisco)
So its your client end of the connection which is not working.
I put your easyfind address into my client in Australia and it connects successfully to your server via easyfind, and i can see your 6 devices listed.
( I am behind two levels of NAT at my home office in Australia)
So its definitely the network connection on your client side.
.
Thank. Works