I am using my DD WRT router as a vh server with a bluetooth dongle and it works fine if it is the only usb device there.
When i plug in another usb (storage) in the other router port and boot the router the client sees the bt dongle, conencts to it but i can not connect nothing to it and it does not discover nothing, if i remove the other usb it works as it should, it works as it should even i connect another usb AFTER the bt.
( i don't want to use the storage with virtual here, even clicked on ignore)
Any idea for a fix?
Thank you
.
When you plug the two devices in run the ddwrt logread function and see if it shows any error
this is the usb log i got
this is the usb log i got from a fresh boot with both devices pluged in
Jan 1 01:00:28 kern.info kernel: [ 28.529325] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 01:00:28 kern.info kernel: [ 28.537387] ehci-platform: EHCI generic platform driver
Jan 1 01:00:28 kern.info kernel: [ 28.557484] ehci-pci: EHCI PCI platform driver
Jan 1 01:00:28 user.info : sfe : shortcut forwarding engine successfully started
Jan 1 01:00:28 kern.info kernel: [ 28.619423] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 1 01:00:28 user.info : httpd : daemon successfully stopped
Jan 1 01:00:28 daemon.info httpd[1297]: httpd : httpd server shutdown
Jan 1 01:00:28 daemon.info httpd[1351]: httpd : httpd server started at port 80
Jan 1 01:00:28 user.info : httpd : http daemon successfully started
Jan 1 01:00:29 user.info : vpn modules : vpn modules successfully unloaded
Jan 1 01:00:29 kern.info kernel: [ 29.010607] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Jan 1 01:00:29 kern.info kernel: [ 29.010690] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Jan 1 01:00:29 kern.info kernel: [ 29.015212] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Jan 1 01:00:29 kern.info kernel: [ 29.022692] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
Jan 1 01:00:29 kern.info kernel: [ 29.037260] hub 1-0:1.0: USB hub found
Jan 1 01:00:29 user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Jan 1 01:00:29 kern.info kernel: [ 29.038312] hub 1-0:1.0: 1 port detected
Jan 1 01:00:29 kern.info kernel: [ 29.042629] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Jan 1 01:00:29 kern.info kernel: [ 29.045160] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Jan 1 01:00:29 kern.info kernel: [ 29.053882] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Jan 1 01:00:29 kern.info kernel: [ 29.059091] hub 2-0:1.0: USB hub found
Jan 1 01:00:29 kern.info kernel: [ 29.066744] hub 2-0:1.0: 1 port detected
Jan 1 01:00:29 kern.info kernel: [ 29.196731] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Jan 1 01:00:29 kern.info kernel: [ 29.196784] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Jan 1 01:00:29 kern.info kernel: [ 29.201416] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Jan 1 01:00:29 kern.info kernel: [ 29.208802] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
Jan 1 01:00:29 kern.info kernel: [ 29.219328] hub 3-0:1.0: USB hub found
Jan 1 01:00:29 kern.info kernel: [ 29.223630] hub 3-0:1.0: 1 port detected
Jan 1 01:00:29 kern.info kernel: [ 29.227660] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Jan 1 01:00:29 kern.info kernel: [ 29.231341] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Jan 1 01:00:29 kern.info kernel: [ 29.239322] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Jan 1 01:00:29 kern.info kernel: [ 29.245122] hub 4-0:1.0: USB hub found
Jan 1 01:00:29 kern.info kernel: [ 29.256105] hub 4-0:1.0: 1 port detected
Jan 6 15:56:19 kern.info kernel: [ 34.305475] xhci-hcd xhci-hcd.1.auto: remove, state 1
Jan 6 15:56:19 kern.info kernel: [ 34.305512] usb usb4: USB disconnect, device number 1
Jan 6 15:56:19 kern.info kernel: [ 34.310041] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
Jan 6 15:56:19 kern.info kernel: [ 34.314568] xhci-hcd xhci-hcd.1.auto: remove, state 1
Jan 6 15:56:19 kern.info kernel: [ 34.320353] usb usb3: USB disconnect, device number 1
Jan 6 15:56:19 kern.info kernel: [ 34.325214] usb 3-1: USB disconnect, device number 2
Jan 6 15:56:19 kern.info kernel: [ 34.331467] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
Jan 6 15:56:19 kern.info kernel: [ 34.338047] xhci-hcd xhci-hcd.0.auto: remove, state 1
Jan 6 15:56:19 kern.info kernel: [ 34.340961] usb usb2: USB disconnect, device number 1
Jan 6 15:56:19 kern.info kernel: [ 34.345876] usb 2-1: USB disconnect, device number 2
Jan 6 15:56:19 kern.info kernel: [ 34.358969] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
Jan 6 15:56:19 kern.info kernel: [ 34.359378] xhci-hcd xhci-hcd.0.auto: remove, state 1
Jan 6 15:56:19 kern.info kernel: [ 34.363710] usb usb1: USB disconnect, device number 1
Jan 6 15:56:19 kern.info kernel: [ 34.373082] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
Jan 6 15:56:19 kern.info kernel: [ 34.405684] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Jan 6 15:56:19 kern.info kernel: [ 34.405768] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Jan 6 15:56:20 kern.info kernel: [ 34.410323] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Jan 6 15:56:20 kern.info kernel: [ 34.417631] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
Jan 6 15:56:20 kern.info kernel: [ 34.426970] hub 1-0:1.0: USB hub found
Jan 6 15:56:20 kern.info kernel: [ 34.433174] hub 1-0:1.0: 1 port detected
Jan 6 15:56:20 kern.info kernel: [ 34.436487] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Jan 6 15:56:20 kern.info kernel: [ 34.440312] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Jan 6 15:56:20 kern.info kernel: [ 34.445586] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Jan 6 15:56:20 kern.info kernel: [ 34.453582] hub 2-0:1.0: USB hub found
Jan 6 15:56:20 kern.info kernel: [ 34.461458] hub 2-0:1.0: 1 port detected
Jan 6 15:56:20 kern.info kernel: [ 34.465322] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Jan 6 15:56:20 kern.info kernel: [ 34.469108] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Jan 6 15:56:20 kern.info kernel: [ 34.474488] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Jan 6 15:56:20 kern.info kernel: [ 34.481937] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
Jan 6 15:56:20 kern.info kernel: [ 34.491268] hub 3-0:1.0: USB hub found
Jan 6 15:56:20 kern.info kernel: [ 34.496822] hub 3-0:1.0: 1 port detected
Jan 6 15:56:20 kern.info kernel: [ 34.500740] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Jan 6 15:56:20 kern.info kernel: [ 34.504441] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Jan 6 15:56:20 kern.info kernel: [ 34.509909] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Jan 6 15:56:20 kern.info kernel: [ 34.517761] hub 4-0:1.0: USB hub found
Jan 6 15:56:20 kern.info kernel: [ 34.525635] hub 4-0:1.0: 1 port detected
Jan 6 15:56:20 kern.info kernel: [ 34.819286] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
Jan 6 15:56:20 kern.info kernel: [ 34.877989] usb 3-1: new full-speed USB device number 2 using xhci-hcd
Jan 6 15:56:20 user.info vhusbdarm[1679]: >>> Starting VirtualHere USB Server v4.2.0 (Built: Jul 27 2020, 11:37:50)<<<
Jan 6 15:56:20 user.info vhusbdarm[1679]: Using configuration /jffs/config.ini
Jan 6 15:56:20 user.info vhusbdarm[1682]: Server licensed to=unlicensed max_devices=1
Jan 6 15:56:20 user.info vhusbdarm[1682]: Using large URB's
Jan 6 15:56:20 user.info vhusbdarm[1682]: Listening on all network interfaces at TCP port 7575
Jan 6 15:56:20 user.info vhusbdarm[1682]: Found Super speed device [0781:5591] " USB, SanDisk 3.2Gen1" at address 21
Jan 6 15:56:20 user.debug vhusbdarm[1682]: Warning, could not open device product file /sys/bus/usb/devices/3-1/product, error 2 (No such file or directory)
Jan 6 15:56:20 user.info vhusbdarm[1682]: Found Full speed device [0a12:0001] "0x0a12, 0x0001" at address 31
the sandisk usb works fine
.
Log looks fine.
I suspect its a power issue then. Can you put a powered USB hub between your router and the two usb devices so that they are not drawing power from the router directly.
Hmm i don't have a powered
Hmm i don't have a powered hub, anyway thanks for the help!