Support

<p>Hello!
</p>
<p>My name is Juliana. We are from Brazil. I work at Luxfacta - IT Solutions.
</p>
<p>We have ordered a license for Virtual Here Server.
</p>
<p>When we start to share our USB camera (Logitech c920) the screen that mirrors the camera in the other pc closes immediately.
</p>
<p>How can this problem be solved?
</p>

Hello, i have a couple of issues this time.
After having the server running for a while, some of the devices reset their names and 4 of them disconnected.
I dont know if anyone touched the setup, but the names should not just reset out of nowhere. I cant recreate the issue as i dont know what happened. Log files didnt really tell me anything.
The 4 that disconnected are all in the same hub, but they show as connected on the server side.

Is there a recommended way to have a CloudHub that is an AP for VirtualHere *and* provides internet access to connected systems via the cloudhub's wifi connection to a router? I'd like to use the WAN when my laptop is connected to Cloudhub.

Woulds any of the "router class" hardware (e.g., GL-MT300N-V2) would handle this better (and easier) than a Raspberry Pi with an extra wifi dongle?

Bonus points if the CloudHub could remember the WLAN wifi SSID/passwords it had previously connected.

Hi!

I try to install virtualhere on my ASUS router with Merlin firmware for remotely using my printer.
It has a readonly file system with only /jffs folder available for writing.

I start virtualhere with "-c /jffs/config.ini" parameter and it seems working.
But when my printer goes to sleep mode and then wakeup I can't see it in the client anymore.
In syslog I can see:
Error 30 creating device node at //_proc_bus_usb_001_007, Read-only file system
Oct 1 07:20:11 [785]: Error making device node at (null)

Hello,

How do I unignore devices?

I have two USB mouse of the same type connected to my host machine, and I want to use virtualhere to send one of them to my client machine. However when I set it to auto use the device, then the next time I start Virtualhere it tries to autouse BOTH devices, and then, because it is the trial version, it tells me I can only use one version. To make it stop trying to use both I tried the ignore function but that made it ignore both devices. And now I cant get them back.

Thanks for any help!

Hi ,

Hi, I´m using the vhclient on Debian Linux, now I have a lot of mdns errors in syslog:
-------
Sep 26 09:58:14 webserver : mDNS_AddDNSServer: DNS server limit of 64 reached, not adding this server
Sep 26 09:58:14 webserver : mDNS_AddDNSServer: DNS server limit of 64 reached, not adding this server
Sep 26 09:58:44 webserver : mDNS_AddDNSServer: DNS server limit of 64 reached, not adding this server
------
I think they are caused by vhclient, can you tell me how to avoid them?

Hi there,
I've been trying to download VirtualHere Server onto my mac but keep running into this error when I am in the process of downloading it. The error says, "The installer encountered an error that caused the installation to fail".
Any idea what this could be? Thanks!

<p>Hopefully a simple question. Does the amount of RAM matter very much? I'm planning to use a Raspberry Pi 4 and powered USB 3.0 hard disk as a Time Machine backup destination on my network. I'll dedicate the Pi to this task. Is 1, 2, or 4GB best? Also, if I have two USB hard drives attached so two different Macs can backup to individual drives, does RAM have an impact there? Just need to know what model Pi 4 to get. I already have two 4GB models but hate to waste them if less RAM will be okay.</p>

Hi,

I'm trying to connect a Arduino MEGA with a ATMEGA2560 chip to my Virtual Here USB server running on Mac OS in order to then forward it to a windows PC. On the Windows machine it is discovered as a USB2.0-Serial device, but none of my programs discover the Arduino properly. Additionally, my USB server on the Mac is giving me errors like the ones below: