Support

<p>I'm testing NAS Server version, my NAS is QNAP, and the version is 3.4.7.
</p>
<p>When I ignore a device(example: xxxx/yyyy) from client, I found that the config.ini at server has the config "IgnoredDevices=xxxx/yyyy".
</p>
<p>Every client can ignore devices and save the config to server? Amazing....</p>

<p>Hi!
</p>
<p>I plugged a raspi 3 with the virtualhere image on it into our network yesterday.<br />
Configured it via the client with static ip and part of existing network.
</p>
<p>Got a call today from my manager asking if I had i setup a dhcp server on our network.
</p>
<p>Found out that the virtualhere image had dhcp server running on the lan interface.<br />
Found out that I could disable it via /etc/config/dhcp, and adding option ignore '1' in the lan section.

I want to transmit video from a usb 2.0 camera (1600 x 1200 576 Mbps) connected to a single board computer over WIFI-n or WIFI-ac.

1. Obviously, compression is required... I am therefore interested in the compression scheme used by virtual here. What is the specification and how capable is it of compressing video?

I use a CPSUB dongle with Virtualhere that it stoppped working with these messages:

I HAve QNAP nas with VirtualHere Server on it. I purchsed a license last month, serial 00089bf0d378. Now serial number changed to "ts,s/n=00089bf0d379,1 device" after QNAP firmware update to 4.3.4, so license is not working anymore.
How can i use this licence? Can i have a new code? Why s/n changed?
Thanks.

I tried to set up TPCast last night, for Open TPCast, but when I connect the battery to the power box, along with powering on the router and transmitter, and activating Virtualhere, the power box won't show up in the USB devices. I've even tried to connect to tp CAST.local on my laptop, but the control panel doesn't respond. I returned the factory memory card to the power box, booted everything up, opened the TP CAST software, and the TP CAST connects. What can I check in Virtualhere, to fix this issue?

Hi, I have latest server on shield tv latest client on liquidsky windows server 2016 pc.....using a usb 3.0 4tb external hard drive or usb 3.0 usb enclosure with pc hard drive plugged into usb 3.0 port on shield tv the client see them but gives error about invalid device descriptor or something like that basically it’s not recognized in device manager and pc or I can’t find driver if one is needed but if plugged into usb 2.0 port on shield tv they mount fine......any help would be appreciated.......thank you

I'm having an issue where my VirtualHere CloudHub (rpi) is showing up as an ipv6 DNS server on my network. For most clients this isn't an issue, but on our Android phones for example, they seem to get stuck looking at the ipv6 DNS and it completely breaks DNS (for everything, these are NOT VirtualHere clients). I've done a lot of testing and if I disable ipv6 on VirtualHere CloudHub the other clients work perfectly. The problem is, it seems there's a daemon that keeps restarting ipv6 on the CloudHub, so this only works temporarily. Is there any way to get the CloudHub to stop using ipv6?

I'm trying to make a Z-Wave/Zigbee USB stick available to a Linux virtual machine. I got it set up with both Debian and Ubuntu and with both systems the device would periodically detach/reattach. When doing so, it reattaches to a different port (i.e. it will detach from /dev/ttyUSB0 and reattach to /dev/ttyUSB1). I tried creating a symlink "virtual" port so that it's always attached to the same location based on product id, etc. however this isn't available in my docker containers.

Hello Michael,

Our USB server is running on a Raspberry Pi2 for some years without problems . But now I can rename only new plugged in devices. Devices which were plugged in after first installation I can't rename over the client or command line. Do you know this problem? I'm updated the server to the current version and use the current client. But the problem ist the same.

Thanks
Robert