Support

I'm running the VirtualHere Server on Windows and have two Lauterbach TRACE32 devices connected. I am evaluating to see if this is a viable solution, so it's a trial.

When I attempt to use either device from a client, I get the following in the server log:

Since installing VirtualHere on December 6th my computer has been shutting down unexpectedly several times. Before installing VirtualHere, I did not have that problem. Now, it appears to be happening when my computer goes to sleep after I had a longer Steam Link session where I use VirtualHere to pass through the input of my T.16000M FCS HOTAS to Elite: Dangerous.

The event log shows an event ID 1001 from the source BugCheck every time this has happened with the following even details:

Hi,

I just exited SteamVR and the Vive is now soft-off but the VH is sill connected.
Additional to that i am still having some ghost drivers, even I turn VH off before I unplug the battery.
the Powerbox has a hight load too, I add a link to a screenshot to the current situation.
We found a workaround with the camera so its enabled on the REV1-Vive.

<p>I'm testing NAS Server version, my NAS is QNAP, and the version is 3.4.7.
</p>
<p>When I ignore a device(example: xxxx/yyyy) from client, I found that the config.ini at server has the config "IgnoredDevices=xxxx/yyyy".
</p>
<p>Every client can ignore devices and save the config to server? Amazing....</p>

<p>Hi!
</p>
<p>I plugged a raspi 3 with the virtualhere image on it into our network yesterday.<br />
Configured it via the client with static ip and part of existing network.
</p>
<p>Got a call today from my manager asking if I had i setup a dhcp server on our network.
</p>
<p>Found out that the virtualhere image had dhcp server running on the lan interface.<br />
Found out that I could disable it via /etc/config/dhcp, and adding option ignore '1' in the lan section.

I want to transmit video from a usb 2.0 camera (1600 x 1200 576 Mbps) connected to a single board computer over WIFI-n or WIFI-ac.

1. Obviously, compression is required... I am therefore interested in the compression scheme used by virtual here. What is the specification and how capable is it of compressing video?

I use a CPSUB dongle with Virtualhere that it stoppped working with these messages:

I HAve QNAP nas with VirtualHere Server on it. I purchsed a license last month, serial 00089bf0d378. Now serial number changed to "ts,s/n=00089bf0d379,1 device" after QNAP firmware update to 4.3.4, so license is not working anymore.
How can i use this licence? Can i have a new code? Why s/n changed?
Thanks.

I tried to set up TPCast last night, for Open TPCast, but when I connect the battery to the power box, along with powering on the router and transmitter, and activating Virtualhere, the power box won't show up in the USB devices. I've even tried to connect to tp CAST.local on my laptop, but the control panel doesn't respond. I returned the factory memory card to the power box, booted everything up, opened the TP CAST software, and the TP CAST connects. What can I check in Virtualhere, to fix this issue?

Hi, I have latest server on shield tv latest client on liquidsky windows server 2016 pc.....using a usb 3.0 4tb external hard drive or usb 3.0 usb enclosure with pc hard drive plugged into usb 3.0 port on shield tv the client see them but gives error about invalid device descriptor or something like that basically it’s not recognized in device manager and pc or I can’t find driver if one is needed but if plugged into usb 2.0 port on shield tv they mount fine......any help would be appreciated.......thank you