Support

I will go through the steps somewhat to show you what I have done to install vhusbdpi (USB Server) on Raspberry Pi. I am using NOOBS 1.3.8

Hi everybody,

I have following setup:

Server:
* Raspberry Pi model B (512 MB / 700 MHz)
* RTL2838 DVB-T stick used for SDR
* Raspbian Jessie krnl 3.6.11+

Client:
* Windows 7 x64
* SDR# application for radio listening

Hey all,

Wondering if anyone has had any luck with iOS 8 devices? I've tried with a couple iOS 7 and Android devices and have been having good luck, but I haven't been able to get iOS 8 to work.

I know there are some hooks for onEnumeration and onBind that are automatically configured on the server. Possibly these need to be updated for iOS 8?

Thanks!

Hello,

I have installed the VirtualHere USB Server on my Raspberry Pi B+, so I connect my USB TDT to the Pi and to the antenna source, and then I can use the VirtualHere client on my laptop to virtually "connect" my USB TDT (which is plugged in to the Pi) and be able to view TV.

However, it goes so freaking slow that audio freezes continuously and I can not see image at all on my laptop.

I bought a powered USB hub, then connected my USB TDT to it and the hub to the Pi, but same result.

Hello,

the ingredients:

Pc with windows 7
A raspberry py ver.2
two hdsl 8Mb
A label printer datamax

Install virtualhere on Rpi ok
install windows drivers on w7 ok
connect Rpi on hdsl 1 and open port on 7575 and connect the label printer on usb of Rpi
connect W7 on hdsl 2

Set the driver for see the Rpi and printer ok

... the print queue ...too slow 3 or 4 minute for a print.
connect all on a local lan 2 sec for print

I do not have enough bandwidth? (ironic)

Hi there,

I have installed the server application on my Synology NAS213. Further a HP LaserJet P1005 is attached to it. The NAS sees the attached printer. I don't know if I should see something from the NAS.

When installing the client software om my Windows 8 laptop it does not find a printer. Adding manualy the NAS with port 7575 it still does not find a printer.

What went wrong?

Marcel

Hi,
I try to use the client on a machine with Ubuntu 12.04 64bit installed. The client starts but when I double click on a USB device shown in the list the system immediatly block itself and the caps-lock led in the keyboard starts blinking. I try the Ubuntu 13.04+ (amd64) and the Debian Wheezly (amd64). The other version says that there are missing library.

What can I do?

Thanks

Hi,

I'm testing the client on a Windows XP system. The client shows the available usb devices (6) but when I try to use a device and install the drivers, as requested, I receive the following error messages,

"Running enumerator (2) failed, error 126 (specified module doesn't found)" (Some parts translated from Spanish).
"There was an error enumerating the Virtual HCD Device (SetupDiGetINFClass returned 0,00000002)".

The System Messages window shows the following messages,

HI,

I try to use virtual here to connect a dongle (a rockey4nd) to the client and when i try to use it i got these error messages : there was a error sharing this device" and " Error "Operation not permitted"(-1) trying to use this device.
If i try to use my keyboard or my mouse which is connect to my raspberry i got no trouble,but with this dongle i do.

I'm on raspbian on a raspberry b+ and i got the last version of virtual here.

Can someone help me please?