Support

<p>Dear All,
</p>
<p>I try to use my 3D printer (From XYZPrinting, Model DaVinci 1.0), the VirtualHere (4.6.5) client display the printer and write 'In use by you', but application XYZWare not see the printer. The printer is connect to my NAS QNAP TS-509 with last firmware (4.2.6 Build 20190322) and last update of VirtualHere (3.4.7).<br />
If i connect the printer by USB Cable, the XYZWare connect to the printer. The last year, i use this configuration with MacOS 10.10.x and works perfectly.
</p>

Hi folks. I am thinking about using VirtualHere on a Raspberry Pi 3 B+ (the one with the gigabit ethernet) to remote a software defined radio to a VM that's running on a server in my basement over a switched gigabit ethernet network.

The SDR can push the limit USB 2.0 rates, and I was wondering if the Raspberry Pi had enough performance to run a virtualhere server that was handling close to 480 mbps. I can't seem to find much info on the Raspberry Pi as a server here, particularly running over gigabit ethernet.

Hello Michael,

I've sent you an e-mail and then decided to post the questions here is they
may be of interest for somebody else as well.

I've just bought your software for my Synology DS1019+ NAS. It is a
very convienient approcach for the software to run as a Windows
service allowing a transparent USB over IP functionality.

But I have several questions regarding the software features and limitations.

Hi

I have problem with sharte Smartcards i alway got erro "Bind Error" i have try some time for connected.
I already in two pcs (server) and some clients same problem.
if i shared other devices(pen driver, mouse no problem).
I use win7 64bits.

hi, I am using security software app Rohos Logon Key (url here: https://www.rohos.com/products/rohos-logon-key/) for Windows which uses USB drive for logon authentication.

Does Virtualhere/CloudHub works if I were to purchase NEXX 3020F and use the attached USB as a remote key to authenticate during Windows login via network (Wifi/LAN)? I am told (by the dev of Rohos) that the USB drive hardware serial needs to be read so in this instance can this be accomplished via Wifi/LAN network?

This always used to work but now it doesn't due to a error 404 on one of your webpages.

hello, i tested the basic config for authorization, but get this error in console,

root@raspberrypi:~# ./vhusbdarm
VirtualHere USB Server is running...press CTRL-C to stop
/root/auth.sh: 19: [: unexpected operator
/root/auth.sh: 19: [: 34819d7beeabb9260a5c854bc85b3e44: unexpected operator
/root/auth.sh: 19: [: 34819d7beeabb9260a5c854bc85b3e44: unexpected operator
/root/auth.sh: 19: [: 34819d7beeabb9260a5c854bc85b3e44: unexpected operator

i jst tested how to work,

config fille call

Hi,

I use VirtualHere USB Client I am trying to connect the same three USB device on the linux machine. I can sometimes connect two of them but when I try to use the other one I never do. I got the following error constantly and don't enumerate the device.

Could you please help to resolve the problem. Thanks,

INFO :In file ../src/msw/window.cpp at line 594: 'SetFocus' failed with error 0x00000057 (The parameter is incorrect.).

Here is the message log:

Hi all,
I need your help to install Client SW on a system with WINDOWS SERVER 2008 R2.

While I try to launch vhui64.exe I find this System error message:
'' The program can't start because api-ms-win-crt-convert-l1-1-0.dll is missing from your computer. Try reinstalling the program to fix this problem.''

I tried to download this .dll file and put it into the right folder and I obtain this error message:
"The procedure entry point ucrtbase.atof could not be located in the dynamic link library api-ms-win-crt-convert-l1-1-0.dll "

Hi friends

I have configured virtualhere on a raspeberry pi as a usb server of a dongle that protect a software that i use on the go, it work's perfectly but i have a problem.
The software that i use is always checking if the dongle is conected, when the client computer goes to sleep i loose the conection to my virtualhere usb server so the software shut down and i loose all my unsaved work, is there any way to prevent this?

usbserver: raspberry pi
cliente: windows 10

Regards

André