Support

We have Safenet Sentinel (Ultra Pro) dongles at work connected to a Raspberry Pi.

I can access them from home, using Win7 guest, via Virtual Box on Mac Book (OS X El Capitan 10.11.6). The Win7 is using a Putty SSH connection to the RPi.

When using VH Client on OS X I can see and connect to the dongles, however they don't appear as usb devices. They don't seem to enumerate. They are not listed in System Profiler and "lsusb" doesn't show anything either.

I have the latest Safenet Sentinel drivers installed (and OS X 10.11 is supposed to be supported).

Hello,

I am interested in running the USB server on various of hosts that would reverse connect to a client. Packaging these for linux or windows are not a problem, but how would one go about it for Android?

What's the best practice for deploying the android server configuration file and all the certificate files that are needed for mutual server and client authentication?

Also, is client certificate and server authentication performed for reverse connections?

Thank you,
Harri

Hi all,

I'm slowly in the process of migrating from my Lenovo NAS to FreeNAS and I just noticed that there is no direct VirtualHere server build for FreeNAS. Using the Linux Server info (found here: https://virtualhere.com/usb_server_software) I can get up to step 3 (sudo ./vhusbdx86_64 -b), but I get the error "Sorry, user root is not allowed to execute './vhusbdx86_64 -b' as root on freenas.local." (freenas is what I'm using as the name for my NAS in the interim).

Hello,

I just bought and installed VirtualHere but it does not work, here is the Log server then the msg that appears on the client.

Serveur :
- 2017-01-16 18:25:41 INFO :Installing driver for class USB {36FC9E60-C465-11CF-8056-444553540000}
- 2017-01-16 18:25:41 INFO :OK driver installed try again...
- 2017-01-16 18:25:41 ERROR :Could not bind installed server driver for class USB
- 2017-01-16 18:25:41 ERROR :Error binding device 4 [13fe:4200] to connection 3, BIND_ERROR

Client:
- There was a error using this device

Hello all, from a new user of VirtualHere and a new member of the forum.

I'm having trouble handling when clients add multiple servers with the same name. I'm using the Windows service to add servers. When a user adds a server, they enter the IP address and port number. To get the name of that server, the LIST or SERVER INFO commands need to be used. With the LIST command, if two servers are connected with the same server name and same hostname:port, then there is no way to tell the difference between the two. Also the SERVER INFO command seems to only return info for the first server it finds with that name.

When trying to install Playstation 3 controller today I got this error:

2017-01-18 06:32:18 INFO :Installing driver for class libusbk devices {ECFB0CFD-74C4-4F52-BBF7-343461CD72AC}
2017-01-18 06:32:18 INFO :Downloading https://www.virtualhere.com/sites/default/files/usbserver/windows/win64…
2017-01-18 06:32:19 ERROR :There was an error downloading, HTTP response code said error (404)

cant seem to connect from 2012r2 to windows 7 host logs below

So, I'm using the Steam Link with a headset (w/ mic) plugged into a USB adapter. I've gotten everything to work without much hassle, however there is a crackle/slight skip in the audio every few seconds. I'm fully wired to my router, at 30Mbps and able to stream in 1080p 60fps with little latency. I've lowered the resolution to 900p after connecting VH and the headset, but it hasn't made a difference with the crackling. Is this just an issue with the Steam Link's weak CPU? Is there an alternative solution? Thanks!

Hi,
i use a Pi3 with Raspbian. After i start vhusbdpin share the xbox360 controller with windows and stop vhusbdpin, the xbox360 controller is no longer usable under Raspbian. I tried to modprobe -r xpad and modprobe xpad, but it still isn't found. If i reboot the Pi3 the controller works again. How can i get the controller working without reboot?