Support

OMNIkey dongle wont work. Plan to buy unlimited lic but seems to be early. Pls , make it works?
Replugged, restart server and client - no result.

Hello,

I recently updated our windows server (win 7 x64) to the latest release and none of the dongles will now connect...

the log from three attempts:

Hi, first time poster here! I'm ready to do some damage.

Here is my issue;
I've downloaded the latest version of vhgui.exe (3.7.5).
I'm running on Windows 10. Pre 1066.
I've created some scripts to help use it as a service. I'm interested in writing some automated stuff for vh. Here are my scripts

Please note that these commands are running in a folder where vhgui.exe has been renamed to "vh.exe". I'm lazy.
stop.bat is
vh -u

go.bat is
vh -l="C:\proj\usb-magic\lib\log.txt" -c="C:\proj\usb-magic\lib\conf.ini" -i

Linux server - client Windows 2012.
When i try work in a graphical mode, the client sees usb device on server. All works.
But I need start client in service mode + Auto-use Device/Port on windows.
My config file C:\Windows\system32\config\systemprofile\AppData\Roaming\vhui.ini in gui mode + Auto-use Device/Port (first device)

Can we have the IP address of the server shown in the LIST command (along with the hostname)? As far as I can tell, there is no way to get the IP address of a server that is added via Auto-find when using the Windows service client. Another possible solution would be to write to the .INI as the servers are found, so that the "ManualHubs=" line can be read as soon as a new server is detected.

Please let me know if this is possible or if there is another way to get the IP address of a server that is added via Auto-Find (using Windows service client).

<p>Hi,
</p>
<p>I am trying to connect to Reiner SCT cyberJack PINPAD smart card reader which came with Utimaco HSM. The driver is libusb based. When I try to connect, I get this error on the server:
</p>
<p> 2016-09-21 08:43:52 INFO :Installing driver for class LibUsbDevices {EB781AAF-9C70-4523-A5DF-642A87ECA567}<br />

Hello,

before I buy the software I have to know some things about it.

Is it possible to use it with an wireless mouse dock (I do have the mouser "Razer Ouroboros") and keyboard, or are there many latencys?

Is it possible to use it with big HDDs and transfer big datas without connection interrupts or anything?

And, if I use the license on an Raspberry Pi Zero and I want to switch to an Raspberry Pi 3 later, is this possible with the same license?

Thank you very much,
Tropaion

Hi,
I've successfuly managed to connect one of my 2 nvidia controllers to my pc this afternoon via virtual usb running on android shield tv
Unfortunately i can't do it anymore, on the client it says "operation not permitted"
it may be because my 2 controllers have just been updated, i dont know...should never have accepted this update :(
any idea ?
Thanks,
max

tvheadend@ubuntu:~$ sudo ./vhclientx86_64 -t "LIST"
VirtualHere IPC, below are the available devices:
(Value in brackets = address, * = Auto-Use)

Windows Hub (HTPC:7575)
*--> 0xc688 (HTPC.10)
--> USB Receiver (HTPC.4)
--> USB WLAN (HTPC.3)
--> (HTPC.8)

Hi
i have the unit Pine64 (www.pine64.com) which i try to use the Virtual here client
when i run it on the Ubuntu i get the following

root@localhost:/home/ubuntu# ./vhclientarmhf
modprobe: FATAL: Module vhci_hcd not found in directory /lib/modules/3.10.101-4-pine64-longsleep
USBIP client drivers are not available, you will have to compile/install your own from the linux kernel source

can you help?