Support

Thank you for an excellent product.

I have a server that collects data from several devices over the network. Devices have RS-232 interface, so I use Prolific USB-to-RS232, and connect devices to Raspberries running Virtualhere servers (licensed). I have total of 3 Raspberries with 6 devices, and growing.

Hi,

I've bought a licence to use Virtualhere to control my main PC which is in an adjacent building connected to my LAN. I currently have a keyboard, mouse and joystick connected through hub. However the mouse is so jumpy when connected through virtualhere that I can't really control the PC. I've tried without the hub with same problem.

I'm currently running the server on Synology ds211j although I do have a Pi which I haven't tried as yet.

Any idea why this might be?

Thanks,

Alex.

Hi,

I just tested Virtualhere with my Raspberry Pi B+ and it works perfectly
I can now remotely control my CANON DSLR CAMERA !
The only problem : I need an external power source for the PI

Hi Michael,

when connecting a USB Software Dongle (WIBU-BOX/U) to a Windows 7 64bit machine, the systems ends up with a bluescreen saying SYSTEM_SERVICE_EXCEPTION. The bluescreen doesn't occur, when connecting to the dongle, but when the dongle is accessed.
The dongle was used with a different USB Device Server before with no problems.
Let me know, what further information you need.

Thanks and regards

Axel

Hi,

I have successfully setup the server and connect to it with Windows and use the devices. This was a test and worked well.
On server side I have also set AutoAttachToKernel=1 so that I can use it when not in use by a client (/dev/ttyUSB0)

Client is unable to find the server.

QNAP TS-459U+
Client version 2.5.7
Server version 1.9.3

Also installed V2 manually from your website. But no luck.

I am running vhui32.exe as service in Windows 7 and everything works fine excpet Win7 each time crashes with bluescreen after waking up from hibernate mode. Can I make any changes to the configuration of the service to avoid this?

Hi Michael,

<p>Hi,<br />
I'm evaluating your software for a home automation project, so I need to eventually have 2 USB-devices attached.
</p>
<p>I'm trying to use a raspberry pi model b+ as the server, and a virtualized debian-host as the client.
</p>
<p>The server works fine against my windows client.<br />
( but I did have to specify both IgnoredDevices and AllowedDevices for the filter to work correctly.).
</p>
<p>While testing the debian-client I ran into problems.<br />

Running OS X 10.10.1... If the raspberrypi gets rebooted, the client crashes, and when you try to bring it up again it says "The application "VirtualHere" is not open anymore.

Only way I have figure out to get past this, is to reboot the mac...