Support

I have a virtualhere server running on a NAS. I need to use this server to access a Safenet 5100 eToken which is connected to the NAS. This works great when I am connected to windows. I am able to find the token through the client then use it to sign my files. The problem is that I am setting up a docker container to automate processes and I simply cannot get my token to work correctly on this container. 

The container is Debian-based. I start by downloading the client with wget:
wget "https://www.virtualhere.com/sites/default/files/usbclient/vhuit64"

I have a pretty simple setup. 
I'm running a raspizero which connects to a 2.4g network I've setup.
This network is created in a ROG Ally (win 11) by making a mobile hotspot.
The rog ally is also connected to another network via 5.8g for internet access purposes.

The setup works great if I'm configuring the raspizero using a separate computer and connects to the ROG Ally perfectly but this is when the problems start.

With all the configurations done, if I then try to get the raspizero to connect to the ally at a later date it simply fails.

Hello, first of all congrats for this fine piece of software!

I am using an GL-AR300M16 with CloudHub fw, connected to a "dumb" hub with some ilok licences. I bought a DUB-H7 but got rev F1, not working.

But I can power cycle the router port just fine using "power_cycle_port" custom event on the client, and all iloks on the hub will get reset.

However, the custom event command will not persist in the command box if I restart the client (on windows 10). Is this by design? Can I make it permanent?

I would very much want to make it on demand, if possible.

2. Write the firmware
 CHOOSE THIS SECTION OF YOU HAVE A RASPBERRY PI
Are you upgrading from a previous edition of CloudHub?

Hello everyone,

When I send my USB over WiFi and I launch a software to establish communication between this software and the USB, it disconnects randomly only when I start it up.
It's a USB B female connector on my electronic board, but when I send a USB C female connector with roughly the same board, it works. Could the problem come from there?

Thanks.

Hello!

Came across your product and got a license to use it but something very strange started to happen coincidentally right after I got the license. My setup is the following

• Nvidia Shield 2019
• 8BitDo Ultimate Bluetooth Controller BUT I'm using the 2.4ghz dongle for better latency
• Microsoft Wireless Keyboard with Trackpad (this has no issues)
• Sunshine / Moonlight
• Starting games using Launchbox/BigBox on PC

Description of the issue:

https://www.virtualhere.com/sites/default/files/usbserver/virtualhere_4.6.3_noarch_6.0-7321.spk page not found error

Hello,
I have been trying unsuccessfully to run VirtualHere client.
Here's the LOG: 

2024-04-06 20:30:16 INFO  :VirtualHere Client 5.6.1 starting (Compiled: Apr  5 2024 13:35:16)
2024-04-06 20:30:16 INFO  :Client OS is Windows 11 (build 22631), 64-bit edition
2024-04-06 20:30:16 INFO  :Using config at C:\Users\Yaroslav\AppData\Roaming\vhui.ini
2024-04-06 20:30:16 INFO  :IPC available at \\.\pipe\vhclient

Attempting to start the current version (5.6.1) of the Linux GUI client with sudo vhuit64 fails with the following error on Ubuntu 20.04 LTS:

vhuit64: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by vhuit64)
vhuit64: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.34' not found (required by vhuit64)
vhuit64: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by vhuit64)

Hi all, 

I have been pulling out my hair for 3 days in a row and finally found that VirtualHere client was the culpit of all the issues. 
I got a brand new laptop (Asus ROG Zephyrus G16 MY605) which is a brand new high end laptop.