Support

I am looking to find a copy of Virtualhere Client 4.2.0 32-bit software. Does anyone know where I could get it from?

Also, - Michael why don't you keep a repository of older versions? I have found that the current versions of the software no longer work for us. I have managed to find a couple of older versions but it seems like 4.2.0 is the last one that works correctly 4.9.5.0 does not work nor does anything newer.

First install vhui64 on server 2016.
have only 32bit drivers for some usb.
Ok. remove service, then vhui64 -u and vhui64 -y ...

but when I run vhu32 the system says
"Please run the 64-bit version of VirtualHere Client instead."

32 bit reinstalled normal instead vhusbdwin64

- Canon MF4450 printer connected via USB to Asustor Nimbustor NAS

- Asustor NAS connected to wired network with VirtualHere USB Server installed

- Windows 10 PC connected to wired network VirtualHere client installed

- Printer address visible on NAS

$ lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation:2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation:3.0 root hub
Bus 001 Device 005: ID 04a9:2737 Canon, Inc.:MF4410

- Port 7575 forwarded

I have a licensed VH server,running on a x86 server.

Client runnig on a x86 PC in a same LAN network.

I use a USB3.0 SSD test the transfer speed,and only have 30Mbps=4MB/S

Is there anything wrong?

THX

We have 3 USB devices being served up for use. We have enabled SSL for access, due to issues with losing connection over VPN.

The USBs connections are no longer being disconnected when inactive due to a stable connection.

Is it possible to setup the server to release a device after a period of time, or from non-use after a period of time.

Example: Client 1 has USB1 in use over SSL. After 4 hours he needs to "re-borrow" the device, or if he is not actively using the device after 15min, he releases the device automatically.

Is this possible ?

Hello,

I am looking to find an older version of VH that seems to work with the hardware I have. The newer versions do not seem to work. I am looking for 2.6.9.0 32-bit windows client.

Please let me know if I am able to find it somewhere.

JB

Hi
After manny hours of strugeling with Raspberry Pi i decided to try to use Virtualhere on a Android device (Samsung Galaxy S6)
I get it working and so, but after some time the connection of the USB device drops.

Here is my log.
I belive its at 13:52:08 and 14:32:21

Dear,

I'm trying to connect several devices to my client (yes, I do have license for the server)
I am also using the server: https://www.virtualhere.com/sites/default/files/usbserver/vhusbdwindk64…
(the vhusbdwin64.exe always fails)

The server is Windows 10 x64 computer and the client is a Windows 10 x64

Some devices is OK.

I tried to share a common DataTraveler 2.0 USB memory from VirtualHare Linux server has virtualhare Windows 10 client and everything works.
On the contrary, using OSX server and Windows clinet the same USB memory does not work
Is there a solution to make it work also from OSX servers?

Using Oculus Quest 2 with a Vive facial tracker.
Both on my phone and Quest, VirtualHere seems to be skipping frames (the facial tracker is essentially a camera), the tracker when normally plugged in using usb shows very tiny movements, but using VirtualHere it seems to be skipping all small changes. There is also around 1 second of latency which isn't there when using USB.

Has VirtualHere recently updated their camera compression to remove these smaller changes or is there something wrong with my setup?