Support

Hello,

is it possible to run the graphical client without using "sudo"?

When i run it with strace, i get

access("/sys/devices/platform/vhci_hcd/attach", W_OK) = -1 EACCES (Permission denied)

When i switch to root and then run the client, it starts.

Greetings

Thomas

I just installed mac version of client, it tried but i think it failed to install the driver. I want to try to uninstall and reinstall the added driver. app removal is easy but the driver does not uninstall when you remove the app. I see the driver is in system information/software as osxdriver 3rd party.

The actual error I am receiving is "there was a error using this device" and no other details on it. the server is a windows 10. mac is a high sierra and device is a iphone 7.

I’m trying to use Virtualhere to use two bluetooth controllers with a RPi (cliebt) and windows pc (server). ultimately, i’d like to play games via moonlight. it seems to work very well, but facing two problems:

1) I’ve installed VH on my windows computer. unfortunately, every time i connect one of the controller with the RPi, a pop-up comes up that it successfully connected. this pop-up is not only annoying, but also doesn’t play well with moonlight (changes active window). is it possible to stop this pop-up?

Found USB Server to be very useful program, however i faced a problem.

On my openwrt MIPS router, I am able to get run vhusbdmipsel - as USB Server.
However unable to run vhclientmipsel - as USB Client on the same router.

Both Console only mode or as background daemon mode does work.
the executable are store at /usr/bin/vhusbd, set chmod +x

./vhclientmipsel -n
./vhclientmipsel -t list

Message returns: "An existing client is not running. Start the client first so it can be connected to"

saludos he cometido un error por accidente he ignorado un puerto y quiero que me ayuden a restaurarlo para poder usarlo..
cuales son los pasos a seguir....

I'm using Virtual Here on Windows .
Client and Server were installed with Bonjour 20/9/2018
Trial licence, as I'm trialling the software

I borrowed the USB using the client overnight, then the next morning released it.
I then renamed the server and USB device in the client [probably irrelevant], and tried to borrow the USB again a few hours later. However, now it won't bind and the server complains the device is in use on the server.
The USB stick is a software license dongle, and I can see that no one is running the software at the moment.

Win7 Server (64bit) / Win10 Client (64bit), USB device is a PicoQuant HydraHarp
Server log shows the following:
2018-09-20 07:32:54 INFO :>>> Starting VirtualHere USB Server v3.7.3 (Built: Sep 16 2018, 13:41:05)<<<
...
2018-09-20 08:11:31 INFO :Installing driver for class PQUSB {55617605-BF4D-4847-ADA8-C6FC95BE35DD}
2018-09-20 08:11:31 INFO :Downloading https://www.virtualhere.com/sites/default/files/usbserver/windows/win64…

I recently updated to version 3.7.3 on my Raspberry Pi 3. Now the server won't start. Here is the syslog output:

I'm using the Mac OS Server and Windows 10 client. Every few minutes the device I'm using will disconnect and 1-30 seconds later reconnect to eventually start the cycle over. I'm using a wired connection on both platforms, both exceeding 200Mbps up/down at any given time.

<p>I'm considering purchasing Raspberry Pi 3B for CloudHub because of its four USB ports. But other products listed in the "Hardware" page seem to implement only one USB port. I'm worried if the CloudHub server software supports only one USB device per server.
</p>
<p>All ports on Raspberry Pi 3, or some other product with a USB hub, are simultaneously available to CloudHub? I'm sure there must be enough power supply so that connected devices work properly.
</p>
<p>Thanks</p>