Support

There is an USB product called Seneye which allows you to monitor things over USB.
Now the vendor updated their software so it isn't possible anymore to use VirtualHere to virtualise the USB. They did this because they are selling a WIFI->USB product and want to make additional sales on this expensive device.

How is it possible that they can prevent the use of VirtualHere? And can VirtualHere fix this so we can use it again for this purpose?

I'm using this by talking directly to the pipe. Most of the time it's fine, but I have seen an "IPC client ReadFile failed, error: 109" error and a crash.

The last time it happened during a "MANUAL HUB ADD", but I have seen it with "LIST" as well. Here's two entries in the syslog from last time:

hallo..

Hello,
We are using VirtualHere with one Synology NAS. We installed 3 USB Hubs with 10 slots per Hub, so that we should be able to get 30 devices running in summery.
Unfortunately it seems to be a limit either in the Software VirtualHere or in the Synology because we only get 24 devices online. The other 6 devices will not be added to the device List.

Regards
Martin Kleefisch

Hi-- I'm getting an error trying to bind a couple of x-rite devices:

:Installing driver for class XRiteDevices {D0142122-F525-4E76-86B3-E8AFD91364F2}
2017-11-13 16:40:45 INFO :Downloading https://www.virtualhere.com/sites/default/files/usbserver/windows/win64…
2017-11-13 16:40:46 ERROR :There was an error downloading, HTTP response code said error (404)
2017-11-13 16:40:46 ERROR :Could not install driver for class XRiteDevices

Hi,

How to set the maximum number of device to share on a server ?

Best regards,
Fabien

When I open a client "vhui64.exe" on Windows Server 2012 , a message box says: "VirtualHere USB Sharing Has Stopped Working" , the the app is crushing.
What's the problem ?

Hi,

I am trying to use VirtualHere to connect a ANT+ USB sensor to a server. The VirtualHere server runs on a laptop with the USB device connected, and the client runs on the server.
The connection between the two works fine, but it seems to be only one way communication from VirtualHere server to client.
Is there a way to have a two-way communication (i.e. send and receive data from the USB device)?

Hello,
i'm testing VirtualHere server on my VPN router, it is connect on internet by USB LTE dongle. (huawei 3372)
I need hide or disable the possibility to connect to this device, because if I wrong to choose the periferical and I select USB LTE dongle, internet connection go down.
There is a configuration for do this?

Thanks

Good afternoon, I have a windows client that try to connect on an android server; pc is linked with android feature router Wi-Fi (so there isn't an external acces point). what is the cause of this issue? I must set to listening the port tcp 7575 on android device?