Support

I need to connect a hub to my Raspberry Pi in order to connect a number of USB devices. Since USB hubs are notoriously finicky, I was wondering if anyone has recommendations about hubs they've used that work well, work not so well, etc. The USB devices in question are USB console ports from Cisco networking devices.

Hello,

I have an Icom IC-7100 ham radio connected via USB to a Raspberry Pi 3 B running the latest firmware. I'm using the Pi-optimized Virtualhere server (3.3.5) on the Pi. The USB connection from the Icom presents 3 devices to the Pi: Serial port A, serial port B, and an audio codec. This is lsusb output from the pi:

Hello everybody,

Installed Steam, installed American Truck Simulator (ATS).
Ran the T150 installation program.
Plugged T150 into USB on computer. Drivers loaded. All configurations worked, and the T150 operated correctly in ATS. The T150 appears in the Devices and Printers screen as a Thrustmaster FFB Wheel.

I have checked this link on another form but the controller won't connect???
http://steamcommunity.com/app/440520/discussions/0/359543951698414812/#…

hello

tried connection between Server on Win7x64 and Client on Win7X86 with both laptops connected on same tp-link router and all ok

pls help connecting over the internet as Server on Win7x64 has internet from Android hotspot --- and client on Win7X86 has internet from local provider through tp-link router

on both laptops there's no antivirus

on both laptops win firewall deactivated and no 3rd party installed

on router had some port forwarding rules, but now deactivated

Hello

Hi,

in my QNAP TS-653Pro I have a SSD as cache for my QNAP. It is and must not be used by other stuff.

When I look at the Windows Client of VirtualHere I see a device called IUM01-512MFHS this seems to be my 512GB caching SSD. When I connect to this device I get a message from Windows if I would format it. That means I'm really able to connect to my QNAP hard drive configured as caching disk.

That's very bad, because if I connect in mistake this device I would be able to destroy the data on my QNAP!

Dear Support

If I rely on the auto connect and auto use kick features, can I automate the auto use kick feature to kick a client connected to a device for XX amount of time before allowing them to reconnect?

Thanks

Nathan

I've been running the Windows Server version as a service for a while now on three different systems. Generally all has been good.

Yesterday one of the guys here removed the service to update to the latest version and now it wont start.
On install it installs the service and then fails with a "timeout" message, if the service is started manually it starts and then stops immediately.

There is nothing in the event log to point to the issue.
Rebooted etc, makes no difference.

Can run VH server as application fine, it's just the service that's not working.