Support

I am trying to connect an RTL-SDR stick to a remote windows 10 system (from a Mac) using VirtualHere. I am able to share other USB devices from the Mac to Windows, and I can select the RTL stick on windows in the VirtualHere interface. However, I cannot seem to see the stick in SDR# This may be a driver problem, but I tried running Zadig and still no success. Any help would be much appreciated.

My current setup:

MacOS Sonoma (Server 4.6.1, Free version) through Tailscale (university wifi, cant port forward and reverse client doesn't work)

Windows 10 (Client 5.5.7) also through Tailscale

Thrustmaster TMX (same as the T150) wheel connected to mac 

I have just begun my journey in search of a solution for this problem. Apparently, I am not alone. The specifics of my issue are that, after configuring the VirtualHere client to automatically use all of the devices it found, my cordless mouse stopped working I plugged in a corded mouse, and the same thing happened. Now I can't get either mouse to work. I'm not even getting a mouse pointer.

I have a Linux laptop connected to a virtualhere server on a Zimmaboard running the Goldmont server version. It runs as a service using init.d and loads and unloads perfectly fine. On initial loading of the system, everything seems to be running fine. The server is connected through ethernet and the laptop is also connected through ethernet. The server is connected to a Beringher X16 audio mixer device. 

Hello!
I have trouble with frozen some Moza devices with VH.
I get random frozen signal from pedals / shifter (not up or down gear).

See video with problem. You can see green linear sensor.
https://youtu.be/u_gGhlor7jQ
https://youtu.be/z_dhjlFmiD8

All devices perfectly work via general usb 3.0 cable 3m pc <> usbhub.

It would be good to add work through a proxy to the client.

I'm using github actions + virtualhere client + safenet token + jsign.

The signing works fine on my work machine.

But with github actions (windows-lastet) I'm having problems.

I asked jsign developers.
They said they couldn't find the token.

Could this have something to do with VirtualHere?

ref: https://github.com/ebourg/jsign/issues/189

Hello, can it be that viewing and logging the latency graph hinders the performance?

I have tested this several times through the use of an xinput gamepad program that tests the polling rate, jitter etc of the attached controller.

When I flood VH with the position data of around 500Hz through through the controller I sometimes also see these large spikes in the graph (10ms orso), also the polling rate seems to be lower when the graph is active and logging. Sometimes just shy of 300Hz. Also Jitters and overal latency is higher.

Hello,

My hardware and set up are:

Does Virtual here support the following usecase?