Support

Hi Michael,

We've recently updated 6 CloudHub images on GL-AR300M16 to version 4.7.5 and all of them have this warning each 4 to 10 minutes:

daemon.warn odhcpd[1271]: No default route present, overriding ra_lifetime!

Prior versions did not have this warning. They are connected via ethernet and have DHCP turned on (no static IP addresses). DHCP renewal works okay.

Hello.
I need to run VirtualHere Server on macOS 10.15. I need to sharing iLok's. How can I make specific ports restart after the iLok is disconnected from client? I've already installed uhubctl, but I can't configure it. My hubs support PPPS. iLok Manager is not installed.

I have the client running as a service on a raspberry pi running Bookworm.  If I execute a list, I get: 

pi@piprod:~ $ /usr/sbin/vhclientarm64 -t "LIST"
VirtualHere Client IPC, below are the available devices:
(Value in brackets = address, * = Auto-Use)

Raspberry Hub (pivh:7575) 
  --> SPE 1.5k (pivh.112) 
  --> Rotator (pivh.114) (In-use by you)

Auto-Find currently on
Auto-Use All currently off
Reverse Lookup currently off
Reverse SSL Lookup currently off
VirtualHere Client is running as a service

Switching from 32 to 64 bit architecture on Raspberry Pi 5 using latest Bookworm.  Getting following error when loading the vhuitarm64 client:

(vhuitarm64:16196): Gtk-CRITICAL **: 12:53:11.171: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar

Seems another user had this problem in April of last year on Bullseye and you gave him a test version to try but that link is gone.

I tested it on another machine just to be sure and the same results.
 

Hi, 

How to check when Connect port client check time with windows command prompt

Hello everybody

I stumbled across virtualhere while I was looking for a solution to wirelessly print photos from my photobooth.

I have installed the latest USB Server on an Raspberry Pi 3B+ and installed the Windows client on the booth. The printer is recognized by the client software and I can set it to "in-use".

Unfortunately, the photo is not getting printed by the printer. But: I am usually using a MacBook at home and printing from the MacBook works like a charm. 

I am trying to use a Loupedeck Live S on a Macbook Pro M3 (Sonoma 14.4.1 (23E224)) from a Pi Zero 2w.

The Loupedeck shows up on the server list and will connect to the computer (it's shown on the Mac's USB list, and the managing software shows it as connected) but the Console screen does not refresh and after a few seconds it will crash and shut off. 

I noticed that for the few seconds before the screen crashes the inputs on the console do work as intended on the computer and managing software.

Hi there,

     had been using VH nicely for USB forwarding from windows to WSL with VH linux GUI client and windows USB server.

Now IT has applied a new Microsoft intune profile to my machine and the windows server gets killed as soon as it is started. Before I go back to IT with a big stick has anyone else had similar issues?

I am using some USB dongles as licenses, however they don't work with VirtualHere.
For example this is the expected value for the Device ID:

Model: USB Flash Disk USB Device - PnP Device ID: USBSTOR\DISK&VEN_USB&PROD_FLASH_DISK&REV_1100\B202011130001468&0

But this is what shows up using VirtualHere.

Model: USB Flash Disk USB Device - PnP Device ID: USBSTOR\DISK&VEN_USB&PROD_FLASH_DISK&REV_1100\3&13CB6D05&0&B202011130001468&0