Support

I am having an issue with my Ubuntu workstation, Ubuntu 12.04.3 LTS x64, and I have the latest virtualhere server, vhusbd64 v1.7.4. The USB devices work fine remotely via the virtualhere software, even new devices plugged show fine in virtualhere and work when connected to windows client. The problem is I can no longer use USB devices with my local station, even if they are not used with virtualhere or ignored.

Hello,

I have selected to ignore two USB devices on my Raspi with the Windows client.
Now I would like "un-ignore" them. What is the correct way of doing so?

I have stopped the daemon and manually edited the file /root/config.ini and removed everything from the option "IgnoredDevices".
Strange: the option "IgnoredDevices" only shows one ignored device and not both devices. However, the second missing device is also not listed anymore. It is completely gone from VH-client. I have not tried to reboot yet.

Hi!

Would it be possible to add a monitoring/sniffing interface to either the client or the server so that one can capture the complete traffic
between the host and the device?
(Control-, Bulk-, Interrupt-, Iso-transfers for all endpoints)
Could be helpful for embedded firmware development on small microcontrollers.
Eg.: http://www.fourwalledcubicle.com/LUFA.php (USB host and USB device support for Atmel AVR µCs)

Cheers,
Nano

hello
I can not get to a Raspberry with virtualhere, I get this in the log:

23:21:20 INFO :VirtualHere 1.9.2 starting (Compiled: Dec 6 2013 23:21:43)
23:21:20 INFO :Using config at C:\Documents and Settings\Administrateur\Application Data\vhui.ini
23:21:20 INFO :Starting Bonjour...
23:21:20 INFO :Bonjour started
23:21:20 INFO :Starting Manual Lookup...
23:21:20 INFO :Manual Lookup started
23:47:21 INFO :handleConnect error Aucune connexion n'a pu être établie car l'ordinateur cible l'a expressément refusée (192.168.1.12:7575)

Hi,

I recently installed VH on my RPi and on my Pc. It works fine, i find my RPi in the list and i can see which devices are connected.
I tried to connect a normal mouse to test it. But i cannot use the device. I always get the following error (even if i change the device):

Error:

The VirtualHere Drivers could not be loaded.
Please reboot your machine and run VirtualHere again to install/upgrade the drivers.


Hello Michael,

do you have any plans for a Linux client as well?

Thanks,
Christian

I installed VH on a Raspberry PI last week to share data from a weather station. Everything was rock solid for about five days, but recently the client has started dropping the connection several times an hour. I've attached the log messages from the latest crash below. The cycle of messages is repetitive, with the same series of six lines over and over.

Hi,
using QPKG Center, the installation don't create folder under ../.qpkg/ with all files.
In web UI i see "installation complete" but missing all files!
Why?

Thanks,
Franco

Hi,

i have a mid 2011 macbook air running maverick that is not able to run your client. all it does is show a loading beach ball after it announces that virtual here drivers will be updated upon running of the client.

pls assist.

PS: my other mac mini running maverick is able to work.

tks.