Support

After plugging my USB drive into the back of my Nvidia Shield Pro and formatting it, I ran the VH server software and then ran the client software on my Windows 10 PC. The first thing Windows tells me is that I need to format the USB drive in order to use it. I get this message in spite of just having formatted it using the Shield. At any rate, the client software recognizes the server and I copy files to the USB drive. So far so good. But then I'd go back to the Shield and run the X-Plore file explorer and there is no sign of the USB drive.

Hello, I'm Togamitsu, from Japan.
We have a PC (Windows 10) connected to a Wi-Fi router and a RaspberryPi.
The RaspberryPi has a USB printer connected to it.
The PC and the USB printer are connected and recognized via VirtualHere.
However, when I try to print, the printer suddenly disconnects from the server as far as VirtualHereClient is concerned, and printing fails.
Do I need to change any settings to make it work?

Greetings!

I'm looking at buying a microphone headset that connects through a USB-C port. Will this register and work through virtualhere? Or will I need to get the USB-A one? Thank you for the help.

Here is the headset I'm looking at getting.

https://www.encoredataproducts.com/usb-headsets/hamiltonbuhl-mach-2-usb…

Hello!

I'm a new user of VirtualHere and I'm trying to control VirtualHere Client using the terminal on a Mac.
I've found that the VirtualHere USB Client it's controllable over a Named pipe.

Is there any existing example of how to control VH using the terminal?

Hello, I have a problem to use an iphone on a windows desktop computer that I use as a server, in which I have access to the internet but I have restricted administrator privileges for creating folders and files.
When I try to use de iphone on the client computer, the server try to download the drivers but gives an error… I think that it would be because the limited privileges in the server one. And then the iphone gives connection error in the client and cannot be used.

Hello,

I just thought I would mention that it does not seem possible to copy from the server log - even when using the "copy to clipboard" button. I've tried a few other options too - selecting text, and right click>copy, or the same and Command+C, but nothing seems to work.

Hi there!

I have VH-Server installed on a QNAP-NAS (QTS 5.x) and want to share an iLok between my
Workstation (MacPro, OS 12.2.1) and my MacBook (OS 12.2.1).
When i disconnect the iLok on my MacPro ("Stop using this device") and connect it afterwards
on my MacBook i´ll get the Message "iLok Sharing Error...".

I need to physically unplug the iLok to get it to work again.

I´m using an AMAZON Basics ‎HUC9002V1ESL which is, according to the uhubctl-list "compatible"....

Any ideas how to get the iLok-Switching to work?

Thanks in advance,

I have a RPI 4 running with a virtual server (licenced) runs already ea few months correct but now its not showing any usb ports anymore.

Server is running i can connct to my RPI and on the windows client is the raspberry hub showing. I can chane the usb ports (usb 2/3) on the RPI but it does not help.

RPI broken or something else?

Kind regards
Bart
T

Hi Michael

I am trying to connect a VGA (640x480) webcam running at 30fps to stream from a clouddhub server (Raspberry PI4B hardware) to a remote PC.

It seems the performance of the onboard WIFI of the PI4B can only handle up to about 70~80Mbps. I can only get stable frames if I lower the frame rate to 15 fps.

I am thinking it could be solved if I connect my ALFA AWUS036ACM USB wifi adapter with 2T2R to the Pi4B . Unfortunately the cloudhub firmware doesn't seem to include the driver for this adapter so I am unable to test out this configuration.

Hello,

I wanted to try VirtualHere on combination of RaspberryPi 3 for server (most recent firmware and up to date standard raspbian) and MacOS Monterrey as client (both Intel and M1 versions).

Installation and port autodetection went smoothly, but unfortunately sketch uploading always fails and leaves arduino in some weird state after which I need to connect it physically to MacOS machine and program it there. This is debug log when uploading sketch:

Arduino: 1.8.19 (Mac OS X), Board: "Arduino MKRZERO"